Shell theorem


In classical mechanics, the shell theorem gives gravitational simplifications that can be applied to objects inside or outside a spherically symmetrical body. This theorem has particular application to astronomy.
Isaac Newton proved the shell theorem and stated that:
  1. A spherically symmetric body affects external objects gravitationally as though all of its mass were concentrated at a point at its centre.
  2. If the body is a spherically symmetric shell, no net gravitational force is exerted by the shell on any object inside, regardless of the object's location within the shell.
A corollary is that inside a solid sphere of constant density, the gravitational force within the object varies linearly with distance from the centre, becoming zero by symmetry at the centre of mass. This can be seen as follows: take a point within such a sphere, at a distance from the centre of the sphere. Then you can ignore all the shells of greater radius, according to the shell theorem. So, the remaining mass is proportional to , and the gravitational force exerted on it is proportional to , so the overall gravitational effect is proportional to, so is linear in.
These results were important to Newton's analysis of planetary motion; they are not immediately obvious, but they can be proven with calculus.
In addition to gravity, the shell theorem can also be used to describe the electric field generated by a static spherically symmetric charge density, or similarly for any other phenomenon that follows an inverse square law. The derivations below focus on gravity, but the results can easily be generalized to the electrostatic force.

Derivation of gravitational field outside of a solid sphere

There are three steps to proving Newton's shell theorem. First, the equation for a gravitational field due to a ring of mass will be derived.  Arranging an infinite number of infinitely thin rings to make a disc, this equation involving a ring will be used to find the gravitational field due a disk.  Finally, arranging an infinite number of infinitely thin discs to make a sphere, this equation involving a disc will be used to find the gravitational field due to a sphere.
The gravitational field at a position called at on the x-axis due to a point of mass at the origin is
Suppose that this mass is moved upwards along the y-axis to point.  The distance between and the point mass is now longer than before; It becomes the hypotenuse of the right triangle with legs and which is. Hence, the gravitational field of the elevated point is:
The magnitude of the gravitational field that would pull a particle at point in the x-direction is the gravitational field multiplied by where is the angle adjacent to the x-axis. In this case,. Hence, the magnitude of the gravitational field in the x-direction, is:
Substituting in gives
Suppose that this mass is evenly distributed in a ring centered at the origin and facing point with the same radius.  Because all of the mass is located at the same angle with respect to the x-axis, and the distance between the points on the ring is the same distance as before, the gravitational field in the x-direction at point due to the ring is the same as a point mass located at a point units above the y-axis:
To find the gravitational field at point due to a disc, an infinite number of infinitely thin rings facing, each with a radius, width of, and mass of may be placed inside one another to form a disc.  The mass of any one of the rings is the mass of the disc multiplied by the ratio of the area of the ring to the total area of the disc.  So,. Hence, a small change in the gravitational field, is:
Substituting in and integrating both sides gives the gravitational field of the disk:
Adding up the contribution to the gravitational field from each of these rings will yield the expression for the gravitational field due to a disc.  This is equivalent to integrating this above expression from to , resulting in:
To find the gravitational field at point due to a sphere centered at the origin, an infinite amount of infinitely thin discs facing, each with a radius, width of, and mass of may be placed together.
These discs' radii follow the height of the cross section of a sphere which is an equation of a semi-circle:.  varies from to.
The mass of any of the discs is the mass of the sphere multiplied by the ratio of the volume of an infinitely thin disc divided by the volume of a sphere.  The volume of an infinitely thin disc is, or.  So,.  Simplifying gives.  Again, varies from to.
Each discs' position away from will vary with its position within the 'sphere' made of the discs, so must be replaced with. still varies from to.
Replacing with, with, and with in the 'disc' equation yields:
Simplifying,
Integrating the gravitational field of each thin disc from to with respect to, and doing some careful algebra, beautifully yields Newton's shell theorem:
where is the distance between the center of the spherical mass and an arbitrary point. The gravitational field of a spherical mass may be calculated by treating all the mass as a point particle at the center of the sphere.

Outside a shell

A solid, spherically symmetric body can be modeled as an infinite number of concentric, infinitesimally thin spherical shells. If one of these shells can be treated as a point mass, then a system of shells can also be treated as a point mass. Consider one such shell :
Applying Newton's Universal Law of Gravitation, the sum of the forces due to the mass elements in the shaded band is
However, since there is partial cancellation due to the vector nature of the force in conjunction with the circular band's symmetry, the leftover component is given by
The total force on, then, is simply the sum of the force exerted by all the bands. By shrinking the width of each band, and increasing the number of bands, the sum becomes an integral expression:
Since and are constants, they may be taken out of the integral:
To evaluate this integral, one must first express as a function of
The total surface of a spherical shell is
while the surface area of the thin slice between and is
If the mass of the shell is, one therefore has that
and
By the law of cosines,
and
These two relations link the three parameters, and that appear in the integral together. As increases from to radians, varies from the initial value 0 to a maximal value before finally returning to zero at . At the same time, increases from the initial value to the final value as increases from 0 to radians. This is illustrated in the following animation:
To find a primitive function to the integrand, one has to make the independent integration variable instead of.
Performing an implicit differentiation of the second of the "cosine law" expressions above yields
and thus
It follows that
where the new integration variable increases from to .
Inserting the expression for using the first of the "cosine law" expressions above, one finally gets that
A primitive function to the integrand is
and inserting the bounds and for the integration variable in this primitive function, one gets that
,
saying that the gravitational force is the same as that of a point mass in the centre of the shell with the same mass.
Finally, integrate all infinitesimally thin spherical shell with mass of, and we can obtain the total gravity contribution of a solid ball to the object outside the ball
Between the radius of to, can be expressed as a function of, i.e.,
Therefore, the total gravity is
which suggests that the gravity of a solid spherical ball to an exterior object can be simplified as that of a point mass in the centre of the ball with the same mass.

Inside a shell

For a point inside the shell, the difference is that when θ is equal to zero, ϕ takes the value π radians and s the value R - r. When θ increases from 0 to
π radians, ϕ decreases from the initial value π radians to zero and s increases from the initial value R - r to the value R + r.
This can all be seen in the following figure
Inserting these bounds into the primitive function
one gets that, in this case
saying that the net gravitational forces acting on the point mass from the mass elements of the shell, outside the measurement point, cancel out.
Generalization: If, the resultant force inside the shell is:
The above results into being identically zero if and only if
Outside the shell :

Derivation using Gauss's law

The shell theorem is an immediate consequence of Gauss's law for gravity saying that
where M is the mass of the part of the spherically symmetric mass distribution that is inside the sphere with radius r and
is the surface integral of the gravitational field g over any closed surface inside which the total mass is M, the unit vector being the outward normal to the surface.
The gravitational field of a spherically symmetric mass distribution like a mass point, a spherical shell or a homogeneous sphere must also be spherically symmetric. If is a unit vector in the direction from the point of symmetry to another point the gravitational field at this other point must therefore be
where g only depends on the distance r to the point of symmetry
Selecting the closed surface as a sphere with radius r with center at the point of symmetry the outward normal to a point on the surface,, is precisely the direction pointing away from the point of symmetry of the mass distribution.
One, therefore, has that
and
as the area of the sphere is 4πr2.
From Gauss's law it then follows that
i.e. that

Converses and generalizations

It is natural to ask whether the converse of the shell theorem is true, namely whether the result of the theorem implies the law of universal gravitation, or if there is some more general force law for which the theorem holds. More specifically, one may ask the question:
In fact, this allows exactly one more class of force than the inverse square. The most general force as derived in is:
where and can be constants taking any value. The first term is the familiar law of universal gravitation; the second is an additional force, analogous to the cosmological constant term in general relativity.
If we further constrain the force by requiring that the second part of the theorem also holds, namely that there is no force inside a hollow ball, we exclude the possibility of the additional term, and the inverse square law is indeed the unique force law satisfying the theorem.
On the other hand, if we relax the conditions, and require only that the field everywhere outside a spherically symmetric body is the same as the field from some point mass at the centre, we allow a new class of solutions given by the Yukawa potential, of which the inverse square law is a special case.
Another generalization can be made for a disc by observing that
so:
where, and is the density of the body.
Doing all the intermediate calculations we get:

Newton's proofs

Introduction

Propositions 70 and 71 consider the force acting on a particle from a hollow sphere with an infinitesimally thin surface, whose mass density is constant over the surface. The force on the particle from a small area of the surface of the sphere is proportional to the mass of the area and inversely as the square of its distance from the particle. The first proposition considers the case when the particle is inside the sphere, the second when it is outside. The use of infinitesimals and limiting processes in geometrical constructions are simple and elegant and avoid the need for any integrations. They well illustrate Newton's method of proving many of the propositions in the Principia.
His proof of Propositions 70 is trivial. In the following, it is considered in slightly greater detail than Newton provides.
The proof of Proposition 71 is more historically significant. It forms the first part of his proof that the gravitational force of a solid sphere acting on a particle outside it is inversely proportional to the square of its distance from the centre of the sphere, provided the density at any point inside the sphere is a function only of its distance from the centre of the sphere.
Although the following are completely faithful to Newton's proofs, very minor changes have been made to attempt to make them clearer.

Force on a point inside a hollow sphere

Fig. 2 is a cross-section of the hollow sphere through the centre, S and an arbitrary point, P, inside the sphere. Through P draw two lines IL and HK such that the angle KPL is very small. JM is the line through P that bisects that angle. From the geometry of circles, the triangles IPH and KPL are similar.
The lines KH and IL are rotated about the axis JM to form 2 cones that intersect the sphere in 2 closed curves. In Fig. 1 the sphere is seen from a distance along the line PE and is assumed transparent so both curves can be seen.
The surface of the sphere that the cones intersect can be considered to be flat, and .
Since the intersection of a cone with a plane is an ellipse, in this case the intersections form two ellipses with major axes IH and KL, where .
By a similar argument, the minor axes are in the same ratio. This is clear if the sphere is viewed from above. Therefore the two ellipses are similar, so their areas are as the squares of their major axes. As the mass of any section of the surface is proportional to the area of that section, for the 2 elliptical areas the ratios of their masses.
Since the force of attraction on P in the direction JM from either of the elliptic areas, is direct as the mass of the area and inversely as the square of its distance from P, it is independent of the distance of P from the sphere. Hence, the forces on P from the 2 infinitesimal elliptical areas are equal and opposite and there is no net force in the direction JM.
As the position of P and the direction of JM are both arbitrary, it follows that any particle inside a hollow sphere experiences no net force from the mass of the sphere.
Note: Newton simply describes the arcs IH and KL as 'minimally small' and the areas traced out by the lines IL and HK can be any shape, not necessarily elliptic, but they will always be similar.

Force on a point outside a hollow sphere

Fig. 1 is a cross-section of the hollow sphere through the centre, S with an arbitrary point, P, outside the sphere. PT is the tangent to the circle at T which passes through P. HI is a small arc on the surface such that PH is less than PT. Extend PI to intersect the sphere at L and draw SF to the point F that bisects IL. Extend PH to intersect the sphere at K and draw SE to the point E that bisects HK, and extend SF to intersect HK at D. Drop a perpendicular IQ on to the line PS joining P to the centre S. Let the radius of the sphere be a and the distance PS be D.
Let arc IH be extended perpendicularly out of the plane of the diagram, by a small distance ζ. The area of the figure generated is, and its mass is proportional to this product.
The force due to this mass on the particle at P and is along the line PI.
The component of this force towards the centre.
If now the arc HI is rotated completely about the line PS to form a ring of width HI and radius IQ, the length of the ring is 2π.IQ and its area is 2π.IQ.IH. The component of the force due to this ring on the particle at P in the direction PS becomes.
The perpendicular components of the force directed towards PS cancel out since the mass in the ring is distributed symmetrically about PS. Therefore, the component in the direction PS is the total force on P due to the ring formed by rotating arc HI about PS.
From similar triangles: ;, and
If HI is sufficiently small that it can be taken as a straight line, is a right angle, and, so that.
Hence the force on P due to the ring.
Assume now in Fig. 2 that another particle is outside the sphere at a point, p, a different distance, d, from the centre of the sphere, with corresponding points lettered in lower case. For easy comparison, the construction of P in Fig. 1 is also shown in Fig. 2. As before, ph is less than pt.
Generate a ring with width ih and radius iq by making angle and the slightly larger Angle, so that the distance PS is subtended by the same angle at I as is pS at i. The same holds for H and h, respectively.
The total force on p due to this ring is
Clearly,, and.
Newton claims that DF and df can be taken as equal in the limit as the angles DPF and dpf 'vanish together'. Note that angles DPF and dpf are not equal. Although DS and dS become equal in the limit, this does not imply that the ratio of DF to df becomes equal to unity, when DF and df both approach zero. In the finite case DF depends on D, and df on d, so they are not equal.
Since the ratio of DF to df in the limit is crucial, more detailed analysis is required. From the similar right triangles, and, giving. Solving the quadratic for DF, in the limit as ES approaches FS, the smaller root,. More simply, as DF approaches zero, in the limit the term can be ignored: leading to the same result. Clearly df has the same limit, justifying Newton’s claim.
Comparing the force from the ring HI rotated about PS to the ring hi about pS, the ratio of these 2 forces equals.
By dividing up the arcs AT and Bt into corresponding infinitesimal rings, it follows that the ratio of the force due to the arc AT rotated about PS to that of Bt rotated about pS is in the same ratio, and similarly, the ratio of the forces due to arc TB to that of tA both rotated are in the same ratio.
Therefore, the force on a particle any distance D from the centre of the hollow sphere is inversely proportional to, which proves the proposition.

Shell theorem in general relativity

An analogue for shell theorem exists in general relativity.
Spherical symmetry implies that the metric has time-independent Schwarzschild geometry, even if a central mass is undergoing gravitational collapse. The metric thus has form
. For , mass acts as a delta function at the origin. For, shells of mass may exist externally, but for the metric to be non-singular at the origin, must be zero in the metric. This reduces the metric to flat Minkowski space; thus external shells have no gravitational effect.
This result illuminates the gravitational collapse leading to a black hole and its effect on the motion of light-rays and particles outside and inside the event horizon.