South African Class 10E1, Series 1


The South African Railways Class 10E1, Series 1 of 1987 is an electric locomotive.
Between 1987 and 1989, the South African Railways placed fifty Class 10E1, Series 1 electric locomotives with a Co-Co wheel arrangement in mainline service as a new standard heavy goods locomotive.

Manufacturer

The 3 kV DC Class 10E1, Series 1 electric locomotive was designed for the South African Railways by the General Electric Company and built by Union Carriage & Wagon in Nigel, Transvaal. GEC supplied the electrical equipment while UCW was responsible for the mechanical components and assembly.
Fifty locomotives were delivered by UCW between 1987 and 1989, numbered in the range from to. Contrary to prior UCW practice, GEC works numbers were allocated to the Class 10E1 locomotives. With the exception of the Class 9E, also a UCW-built GEC-designed locomotive, UCW did not allocate builder’s numbers to previous locomotives it built for the SAR, but used the SAR unit numbers for their record keeping.

Characteristics

The Class 10E1 was introduced as a new standard 3 kV DC heavy goods locomotive. With a continuous power rating of, four Class 10E1 locomotives were capable of performing the same work as six Class 6E1. The entire fleet of Class 10E1 electric locomotives uses electronic chopper control which is smoother in comparison to the rheostatic resistance control that was used in the Classes 1E to 6E1 range of electric locomotives.

Brakes

The locomotive makes use of either regenerative or rheostatic braking, as the situation demands. Both traction and electric braking power are continuously variable with the electric braking optimised to such an extent that maximum use will be made of the regenerative braking capacity of the network, with the ability to automatically change over to rheostatic braking whenever the overhead supply system becomes non-receptive.

Bogies

The Class 10E1 was built with sophisticated traction linkages on the bogies. Together with the locomotive's electronic wheel-slip detection system, these traction struts, mounted between the linkages on the bogies and the locomotive body and colloquially referred to as grasshopper legs, ensure the maximum transfer of power to the rails without causing wheel-slip by reducing the adhesion of the leading bogie and increasing that of the trailing bogie by as much as 15% upon starting off.

Orientation

This dual cab locomotive has a roof access ladder on one side only, immediately to the right of the cab access door. The roof access ladder end is marked as the no. 2 end. In visual appearance, the Series 1 and Series 2 locomotives are virtually indistinguishable from each other. Their shape earned them the nickname broodblikke amongst train crews.

Service

Most of the Class 10E1 locomotives were placed in service at Nelspruit and Ermelo in Mpumalanga. In 1998, a number of Spoornet’s electric locomotives and most of their Class electro-diesel locomotives were sold to Maquarie-GETX and leased back to Spoornet for a ten-year period which was to expire in 2008. Of the Class 10E, Series 1, numbers to were included in this leasing deal.

Works numbers

The Class 10E1, Series 1 GEC works numbers are listed in the table.

Loco no.
Works
no.
10-0515659
10-0525660
10-0535661
10-0545662
10-0555663
10-0565664
10-0575665
10-0585666
10-0595667
10-0605668
10-0615669
10-0625670
10-0635671
10-0645672
10-0655673
10-0665674
10-0675675
10-0685676
10-0695677
10-0705678
10-0715679
10-0725680
10-0735681
10-0745682
10-0755683
10-0765684
10-0775685
10-0785686
10-0795687
10-0805688
10-0815689
10-0825690
10-0835691
10-0845692
10-0855693
10-0865694
10-0875695
10-0885696
10-0895697
10-0905698
10-0915699
10-0925700
10-0935701
10-0945702
10-0955703
10-0965704
10-0975705
10-0985706
10-0995707
10-1005708

Liveries

All the Class 10E1, Series 1 locomotives were delivered in the SAR red oxide livery with signal red buffer beams and cowcatchers and a yellow V stripe on the ends, folded over to a horizontal stripe below the side windows. The number plates on the sides were mounted without the traditional three-stripe yellow wings. In the late 1990s many were repainted in the Spoornet blue livery with outline numbers on the long hood sides and with a yellow and blue chevron pattern on the buffer beams and cowcatchers. After 2008 in the Transnet Freight Rail era, several were repainted in the TFR red, green and yellow livery.

Illustration