Stopping sight distance is one of several types of sight distance used in road design. It is a near worst-case distance a vehicle driver needs to be able to see in order to have room to stop before colliding with something in the roadway, such as a pedestrian in a crosswalk, a stopped vehicle, or road debris. Insufficient sight distance can adversely affect the safety or operations of a roadway or intersection. Stopping sight distance is the distance traveled during the two phases of stopping a vehicle: perception-reaction time, and maneuver time. Perception-reaction time is the time it takes for a road user to realize that a reaction is needed due to a road condition, decide what maneuver is appropriate, and start the maneuver. Maneuver time is the time it takes to complete the maneuver. The distance driven during perception-reaction time and maneuver time is the sight distance needed. The design standards of the American Association of State Highway and Transportation Officials allow 1.5 seconds for perception time and 1.0 second for reaction time. The values of stopping sight distance used in design represent a near worst-casesituation. For design, a conservative distance is needed to allow a vehicle traveling at design speed to stop before reaching a stationary object in its path. A generous amount of time is given for the perception-reaction process, and a fairly low rate of deceleration is used. The design sight distance allows a below-average driver to stop in time to avoid a collision in most cases. Driver perception/reaction distance is calculated by: Where: Based on the results of many studies, 2.5 seconds has been chosen for a perception-reaction time. This time will accommodate approximately 90 percent of all drivers when confronted with simple to moderately complex highway situations. Greater reaction time should be allowed in situations that are more complex. Braking distance is calculated by: where: Actual braking distances are affected by the vehicle type and condition, the incline of the road, the available traction, and numerous other factors. A deceleration rate of 3.4 m/s2 is used to determine stopping sight distance. Approximately 90 percent of all drivers decelerate at rates greater than that. These values are within most drivers' ability to stay within his or her lane and maintain steering control. Also, most wet pavement surfaces and most vehicle braking systems are capable of providing enough braking force to exceed this deceleration rate. Stopping sight distance is the sum of reaction distance and braking distance
