LC10 was the original name given to a series of very small three-cylinder, two-stroke engines built by Suzuki Motor Corporation in the 1960s and 1970s. They were used in a number of kei class automobiles and light trucks. The LC10 and its derivatives did not completely replace the FE and L50 two-cylinders, which continued to be used mainly for light commercials. The LC10 engine was developed together with the Suzuki B100 engine, a single-cylinder motorcycle engine which shared the same bore and stroke. For longevity and convenience, the LC10 received Suzuki's new "Posi-Force" auto-lubrication system, eliminating the need for pre-mixed fuel.
LC10
The engine was first seen in air-cooled form, equipped with three Mikuni VM carburettors, in the 1967 LC10 Suzuki Fronte 360. Displacement was, from a bore and stroke of. Originally developing, a SS version soon appeared, with a stunning. For the conventionally laid out Fronte Van, Estate, and Custom a single carburettor version was used. Combined with a lower compression ratio of 6.8:1, this meant a max power of. For 1971, the LC10 engine received Suzuki's new self-lubricating "CCIS" system. In 1969, Japanese racing car manufacturer Nialco built a single-seater called the RQ which utilized the triple-carb LC10 engine and competed in the RQ Minicar Racing Tournament. Their best result was a fourth in the 1969 meet at Fuji, with Kikuo Kaira at the wheel. Applications:
In May 1971, as kei cars were becoming more and more sophisticated, a water-cooled version was presented. The air-cooled versions were soon relegated to use only in the cheapest versions, and disappeared entirely after 1973 as emissions standards became more stringent. The watercooled versions also had slightly better weight distribution, due to the radiator being mounted up front. This, the LC10W, was the only engine ever to be installed in the iconic Suzuki Fronte Coupé, whether in domestic or export market cars. The new 1973-1976 "oval shell" Fronte received the new LC20 chassis code but retained the LC10W engine code. From 1973 the LC10W engines also received Suzuki's SRIS, a method for lowering visible exhaust smoke by collecting and burning residual oil/gas lying in the bottom of the crank chambers. This was first seen on the Suzuki GT750, GT550, and GT380 motorcycles. In an effort to reduce CO, HC, and NOx emissions, the EPIC system was also installed. Applications:
A bored-out version of the air-cooled LC10, called the LC50 in reference to its near half-litre displacement appeared in January 1969. In street applications, this engine was only for export, and was only ever made with air cooling. Like its smaller brethren, the LC50 breathed through triple carburettors. Water-cooled triples were built for racing purposes, producing at 9,000 rpm. These took part in the JAF Grand PrixFormula Junior class as well as "MR" meets. Thus equipped, the Can-Am style Fronte RF with Mitsuo Itoh at the helm took the victory at the 1970 "Junior Seven Challenge Cup" race, held at Fuji International Speedway, with an average speed of.
In response to the changed Kei car regulations taking effect on January 1, 1976, Suzuki developed a bored out and cleaner version of the LC10W, featuring Suzuki TC emissions equipment. The watercooled engine's bore was, while retaining the stroke. Sometime between 1973 and 1976 Suzuki had changed their system of naming engines, so this engine became the T4A. This meant that it was the first engine with a 0.4-litre displacement. The T4A was fairly short-lived, and was soon replaced by an unrelated "full size" engine called the T5A/T5B. The emissions strangled T4A put out at 4,500 rpm in its final "TC53" form: specific power was 54% of what a 1972 Fronte GT had managed.
