TiB2 does not occur naturally in the earth. Titanium diboride powder can be prepared by a variety of high-temperature methods, such as the direct reactions of titanium or its oxides/hydrides, with elemental boron over 1000 °C, carbothermal reduction by thermite reaction of titanium oxide and boron oxide, or hydrogen reduction of boron halides in the presence of the metal or its halides. Among various synthesis routes, electrochemical synthesis and solid state reactions have been developed to prepare finer titanium diboride in large quantity. An example of solid state reaction is the borothermic reduction, which can be illustrated by the following reactions: 2 TiO2 + B4C + 3C → 2 TiB2 + 4 CO TiO2 + 3NaBH4 → TiB2 + 2Na + NaBO2 + 6H2 The first synthesis route, however, cannot produce nanosized powders. Nanocrystalline TiB2 was synthesized using the reaction or the following techniques:
Solution phase reaction of NaBH4 and TiCl4, followed by annealing the amorphous precursor obtained at 900–1100 °C.
Mechanical alloying of a mixture of elemental Ti and B powders.
Self-propagating high temperature synthesis process involving addition of varying amounts of NaCl.
Milling assisted Self-propagating high temperature synthesis.
Solvothermal reaction in benzene of metallic sodium with amorphous boron powder and TiCl4 at 400 °C:
Many TiB2 applications are inhibited by economic factors, particularly the costs of densifying a high melting point material - the melting point is about 2970 °C, and, thanks to a layer of titanium dioxide that forms on the surface of the particles of a powder, it is very resistant to sintering. Admixture of about 10% silicon nitride facilitates the sintering, though sintering without silicon nitride has been demonstrated as well. Thin films of TiB2 can be produced by several techniques. The electroplating of TiB2 layers possess two main advantages compared with physical vapor deposition or chemical vapor deposition: the growing rate of the layer is 200 times higher and the inconveniences of covering complex shaped products are dramatically reduced.
Potential applications
Current use of TiB2 appears to be limited to specialized applications in such areas as impact resistant armor, cutting tools, crucibles, neutron absorbers and wear resistant coatings. TiB2 is extensively used for evaporation boats for vapour coating of aluminium. It is an attractive material for the aluminium industry as an inoculant to refine the grain size when castingaluminium alloys, because of its wettability by and low solubility in molten aluminium and good electrical conductivity. Thin films of TiB2 can be used to provide wear and corrosion resistance to a cheap and/or tough substrate.