The Van's RV-9 and RV-9A are American two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft of Aurora, Oregon. The RV-9 is the tail-wheel equipped version while the RV-9A features a nose-wheel. The RV-9 was built around a newly designed high aspect ratio wing, featuring a John Roncz ">Roncz airfoil. It is similar in size and weight to the RV-6 and is externally similar to the RV-6 and the RV-7.
Development
The architect of the line of Van's aircraft, Richard VanGrunsven, designed the RV-9 as a departure from the concepts of the earlier RV series. The earlier members of the RV series, starting with the single seatRV-3, were all designed to have light handling, aerobatic capabilities along with fast cruise speeds and STOL capabilities. The RV-9 was designed from the start as a two-place, side-by-side, touring aircraft and as such it forgoes the aerobatic capabilities and the lighter handling for more stability and economy. As such the design horsepower is 118–160 and the prototype was flown with a Lycoming O-235 powerplant of as a proof-of-concept for the lower horsepower. As a result of the lessons learned over the years in producing the first five RV-series designs and the change in role for this aircraft, the RV-9 design incorporated many changes over previous designs. The RV-9A was the first to use what Van's calls "matched-hole" components in that airframe parts are formed to the required contour and have all the rivet holes precisely located. The assembly jigs normally used to ensure alignment are not necessary and build time is much reduced. Later models, such as the RV-7 and RV-10, use this same manufacturing technique. Compared to the similar RV-7, the RV-9 has a wing of increased span and higher aspect ratio using a Roncz airfoil. The RV-9 has a slow stall speed, comparable to the Cessna 150, and docile handling suitable for low-time pilots. The cruise speed is a very respectable TAS even with the engine. The RV-9 shares many common parts with the RV-7 and the RV-8, which reduces production costs. Like those aircraft, the RV-9 uses computer assisted design to produce a kit with pre-drilled rivet holes, thus greatly reducing assembly time for the builder. The RV-9 is unique in Van's aircraft history in that the tricycle gear RV-9A version was flown first on June 15, 2000, three years before the tail wheel version flew. The later conventional landing gear equipped RV-9 was first flown by its designer in 2002. The RV-9A features solid circular spring steellanding gear with the nosewheel mounting tube welded to the engine mount. As in all nose-wheel equipped RV aircraft, the nosewheel is free castering and the aircraft is steered with differential braking. The brakes are mounted conventionally on the rudder pedal toes. As of October 2019, 1134 RV-9s and RV-9As have been completed and flown.
