Concentrated solar power
Concentrated solar power systems generate solar power by using mirrors or lenses to concentrate a large area of sunlight onto a receiver. Electricity is generated when the concentrated light is converted to heat, which drives a heat engine connected to an electrical power generator or powers a thermochemical reaction.
CSP had a global total installed capacity of 5,500 MW in 2018, up from 354 MW in 2005. Spain accounted for almost half of the world's capacity, at 2,300 MW, despite no new capacity entering commercial operation in the country since 2013.
The United States follows with 1,740 MW. Interest is also notable in North Africa and the Middle East, as well as India and China.
The global market was initially dominated by parabolic-trough plants, which accounted for 90% of CSP plants at one point.
Since about 2010, central power tower CSP has been favored in new plants due to its higher temperature operation than trough, which promises greater efficiency.
Among the larger CSP projects are the Ivanpah Solar Power Facility in the United States, which uses solar power tower technology without thermal energy storage.
In the MENA region, the Ouarzazate Solar Power Station came online in Morocco in 2017. It combines trough and tower in three sections for a total of 510 MW with several hours of energy storage.
Morocco began its second large CSP project at Midelt as of mid 2019, at 800 MW, with 5 hours of thermal energy storage daily, and combining trough CSP and PV. It was bid in mid-2019 at just $70/MWh the lowest price for CSP to date.
The DEWA project in Dubai, under construction in 2019, held the world record for lowest CSP price in 2017 at $73 per MWh for its 700 MW combined trough and tower project: 600 MW of trough, 100 MW of tower with 15 hours of thermal energy storage daily.
Dhursar in India uses Fresnel reflector.
Because they both utilize the sun's energy, CSP is often compared to photovoltaic solar, which experienced huge growth in recent years due to falling prices for panel manufacturing and modular growth. However, the capacity of CSP to store energy during the night means it can compete against gas for peak generation in the evening, rather than competing against PV in the daytime.
As a thermal energy generating power station, CSP has more in common with thermal power stations such as coal or gas or geothermal. A CSP plant can incorporate thermal energy storage, which stores energy either in the form of sensible heat or as latent heat, which enables these plants to continue to generate electricity whenever it is needed, day or night. This makes CSP a dispatchable form of solar. Dispatchable renewable energy is particularly valuable in places where there is already a high penetration of photovoltaics, such as California because an evening peak is created as PV ramps down at sunset.
In 2017, CSP represented less than 2% of worldwide installed capacity of solar electricity plants. However, in recent years the falling prices of CSP plants are making this technology competitive with other base-load power plants using fossil and nuclear fuel even in high moisture and dusty atmosphere at sea level, such as the United Arab Emirates. Base-load CSP tariff in the extremely dry Atacama region of Chile reached below ¢5.0/kWh in 2017 auctions.
History
A legend has it that Archimedes used a "burning glass" to concentrate sunlight on the invading Roman fleet and repel them from Syracuse. In 1973 a Greek scientist, Dr. Ioannis Sakkas, curious about whether Archimedes could really have destroyed the Roman fleet in 212 BC, lined up nearly 60 Greek sailors, each holding an oblong mirror tipped to catch the sun's rays and direct them at a tar-covered plywood silhouette away. The ship caught fire after a few minutes; however, historians continue to doubt the Archimedes story.In 1866, Auguste Mouchout used a parabolic trough to producе steam for the first solar steam engine. The first patent for a solar collector was obtained by the Italian Alessandro Battaglia in Genoa, Italy, in 1886. Over the following years, invеntors such as John Ericsson and Frank Shuman developed concentrating solar-powered dеvices for irrigation, refrigеration, and locomоtion. In 1913 Shuman finished a parabolic solar thermal energy station in Maadi, Egypt for irrigation. The first solar-power system using a mirror dish was built by Dr. R.H. Goddard, who was already well known for his research on liquid-fueled rockets and wrote an article in 1929 in which he asserted that all the previous obstacles had been addressed.
Professor Giovanni Francia designed and built the first concentrated-solar plant, which entered into operation in Sant'Ilario, near Genoa, Italy in 1968. This plant had the architecture of today's power tower plants with a solar receiver in the center of a field of solar collectors. The plant was able to produce 1 MW with superheated steam at 100 bar and 500 °C. The 10 MW Solar One power tower was developed in Southern California in 1981. Solar One was converted into Solar Two in 1995, implementing a new design with a molten salt mixture as the receiver working fluid and as a storage medium. The molten salt approach proved effective, and Solar Two operated successfully until it was decommissioned in 1999. The parabolic-trough technology of the nearby Solar Energy Generating Systems, begun in 1984, was more workable. The 354 MW SEGS was the largest solar power plant in the world, until 2014.
No commercial concentrated solar was constructed from 1990 when SEGS was completed until 2006 when the Compact linear Fresnel reflector system at Liddell Power Station in Australia was built. Few other plants were built with this design although the 5 MW Kimberlina Solar Thermal Energy Plant opened in 2009.
In 2007, 75 MW Nevada Solar One was built, a trough design and the first large plant since SEGS. Between 2009 and 2013, Spain built over 40 parabolic trough systems, standardized in 50 MW blocks.
Due to the success of Solar Two, a commercial power plant, called Solar Tres Power Tower, was built in Spain in 2011, later renamed Gemasolar Thermosolar Plant. Gemasolar's results paved the way for further plants of its type. Ivanpah Solar Power Facility was constructed at the same time but without thermal storage, using natural gas to preheat water each morning.
Most concentrated solar power plants use the parabolic trough design, instead of the power tower or Fresnel systems. There have also been variations of parabolic trough systems like the integrated solar combined cycle which combines troughs and conventional fossil fuel heat systems.
CSP was originally treated as a competitor to photovoltaics, and Ivanpah was built without energy storage, although Solar Two had included several hours of thermal storage. By 2015, prices for photovoltaic plants had fallen and PV commercial power was selling for of recent CSP contracts. However, increasingly, CSP was being bid with 3 to 12 hours of thermal energy storage, making CSP a dispatchable form of solar energy. As such, it is increasingly seen as competing with natural gas and PV with batteries for flexible, dispatchable power.
Current technology
CSP is used to produce electricity. Concentrated-solar technology systems use mirrors or lenses with tracking systems to focus a large area of sunlight onto a small area. The concentrated light is then used as heat or as a heat source for a conventional power plant. The solar concentrators used in CSP systems can often also be used to provide industrial process heating or cooling, such as in solar air conditioning.Concentrating technologies exist in four optical types, namely parabolic trough, dish, concentrating linear Fresnel reflector, and solar power tower. Parabolic trough and concentrating linear Fresnel reflectors are classified as linear focus collector types. Dish and solar tower as of the point focus type. Linear focus collectors achieve medium concentration, and point focus collectors achieve high concentration factors. Although simple, these solar concentrators are quite far from the theoretical maximum concentration. For example, the parabolic-trough concentration gives about of the theoretical maximum for the design acceptance angle, that is, for the same overall tolerances for the system. Approaching the theoretical maximum may be achieved by using more elaborate concentrators based on nonimaging optics.
Different types of concentrators produce different peak temperatures and correspondingly varying thermodynamic efficiencies, due to differences in the way that they track the sun and focus light. New innovations in CSP technology are leading systems to become more and more cost-effective.
Parabolic trough
A parabolic trough consists of a linear parabolic reflector that concentrates light onto a receiver positioned along the reflector's focal line. The receiver is a tube positioned directly above the middle of the parabolic mirror and filled with a working fluid. The reflector follows the sun during the daylight hours by tracking along a single axis. A working fluid is heated to as it flows through the receiver and is then used as a heat source for a power generation system. Trough systems are the most developed CSP technology. The Solar Energy Generating Systems plants in California, the world's first commercial parabolic trough plants, Acciona's Nevada Solar One near Boulder City, Nevada, and Andasol, Europe's first commercial parabolic trough plant are representative, along with Plataforma Solar de Almería's SSPS-DCS test facilities in Spain.Enclosed trough
The design encapsulates the solar thermal system within a greenhouse-like glasshouse. The glasshouse creates a protected environment to withstand the elements that can negatively impact reliability and efficiency of the solar thermal system. Lightweight curved solar-reflecting mirrors are suspended from the ceiling of the glasshouse by wires. A single-axis tracking system positions the mirrors to retrieve the optimal amount of sunlight. The mirrors concentrate the sunlight and focus it on a network of stationary steel pipes, also suspended from the glasshouse structure. Water is carried throughout the length of the pipe, which is boiled to generate steam when intense solar radiation is applied. Sheltering the mirrors from the wind allows them to achieve higher temperature rates and prevents dust from building up on the mirrors.GlassPoint Solar, the company that created the Enclosed Trough design, states its technology can produce heat for Enhanced Oil Recovery for about $5 per in sunny regions, compared to between $10 and $12 for other conventional solar thermal technologies.
Solar power tower
A solar power tower consists of an array of dual-axis tracking reflectors that concentrate sunlight on a central receiver atop a tower; the receiver contains a heat-transfer fluid, which can consist of water-steam or molten salt. Optically a solar power tower is the same as a circular Fresnel reflector. The working fluid in the receiver is heated to 500–1000 °C and then used as a heat source for a power generation or energy storage system. An advantage of the solar tower is the reflectors can be adjusted instead of the whole tower. Power-tower development is less advanced than trough systems, but they offer higher efficiency and better energy storage capability. Beam down tower application is also feasible with heliostats to heat the working fluid.The Solar Two in Daggett, California and the CESA-1 in Plataforma Solar de Almeria Almeria, Spain, are the most representative demonstration plants. The Planta Solar 10 in Sanlucar la Mayor, Spain, is the first commercial utility-scale solar power tower in the world. The 377 MW Ivanpah Solar Power Facility, located in the Mojave Desert, is the largest CSP facility in the world, and uses three power towers. Ivanpah generated only 0.652 TWh of its energy from solar means, and the other 0.388 TWh was generated by burning natural gas.
Fresnel reflectors
Fresnel reflectors are made of many thin, flat mirror strips to concentrate sunlight onto tubes through which working fluid is pumped. Flat mirrors allow more reflective surface in the same amount of space than a parabolic reflector, thus capturing more of the available sunlight, and they are much cheaper than parabolic reflectors. Fresnel reflectors can be used in various size CSPs.Fresnel reflectors are sometimes regarded as a technology with a worse output than other methods. The cost efficiency of this model is what causes some to use this instead of others with higher output ratings. Some new models of Fresnel Reflectors with Ray Tracing capabilities have begun to be tested and have initially proved to yield higher output than the standard version.
Dish Stirling
A dish Stirling or dish engine system consists of a stand-alone parabolic reflector that concentrates light onto a receiver positioned at the reflector's focal point. The reflector tracks the Sun along two axes. The working fluid in the receiver is heated to and then used by a Stirling engine to generate power. Parabolic-dish systems provide high solar-to-electric efficiency, and their modular nature provides scalability. The Stirling Energy Systems, United Sun Systems and Science Applications International Corporation dishes at UNLV, and Australian National University's Big Dish in Canberra, Australia are representative of this technology. A world record for solar to electric efficiency was set at 31.25% by SES dishes at the National Solar Thermal Test Facility in New Mexico on 31 January 2008, a cold, bright day. According to its developer, Ripasso Energy, a Swedish firm, in 2015 its Dish Sterling system being tested in the Kalahari Desert in South Africa showed 34% efficiency. The SES installation in Maricopa, Phoenix was the largest Stirling Dish power installation in the world until it was sold to United Sun Systems. Subsequently, larger parts of the installation have been moved to China as part of the huge energy demand.Solar thermal enhanced oil recovery
Heat from the sun can be used to provide steam used to make heavy oil less viscous and easier to pump. Solar power tower and parabolic troughs can be used to provide the steam which is used directly so no generators are required and no electricity is produced. Solar thermal enhanced oil recovery can extend the life of oilfields with very thick oil which would not otherwise be economical to pump.CSP with thermal energy storage
In a CSP plant that includes storage, the solar energy is first used to heat the molten salt or synthetic oil which is stored providing thermal/heat energy at high temperature in insulated tanks. Later the hot molten salt is used in a steam generator to produce steam to generate electricity by steam turbo generator as per requirement. Thus solar energy which is available in daylight only is used to generate electricity round the clock on demand as a load following power plant or solar peaker plant. The thermal storage capacity is indicated in hours of power generation at nameplate capacity. Unlike solar PV or CSP without storage, the power generation from solar thermal storage plants is dispatchable and self-sustainable similar to coal/gas-fired power plants, but without the pollution. CSP with thermal energy storage plants can also be used as cogeneration plants to supply both electricity and process steam round the clock. As of December 2018, CSP with thermal energy storage plants generation cost have ranged between 5 c € / kWh and 7 c € / kWh depending on good to medium solar radiation received at a location. Unlike solar PV plants, CSP with thermal energy storage plants can also be used economically round the clock to produce only process steam replacing pollution emitting fossil fuels. CSP plant can also be integrated with solar PV for better synergy.CSP with thermal storage systems are also available using Brayton cycle with air instead of steam for generating electricity and/or steam round the clock. These CSP plants are equipped with gas turbine to generate electricity. These are also small in capacity with flexibility to install in few acres area. Waste heat from the power plant can also be used for process steam generation and HVAC needs. In case land availability is not a limitation, any number of these modules can be installed up to 1000 MW with RAMS and cost advantage since the per MW cost of these units are cheaper than bigger size solar thermal stations.
Centralized district heating round the clock is also feasible with Concentrated Solar Thermal storage plant.
Deployment around the world
The commercial deployment of CSP plants started by 1984 in the US with the SEGS plants. The last SEGS plant was completed in 1990. From 1991 to 2005, no CSP plants were built anywhere in the world. Global installed CSP-capacity increased nearly tenfold between 2004 and 2013 and grew at an average of 50 percent per year during the last five of those years. In 2013, worldwide installed capacity increased by 36% or nearly 0.9 gigawatt to more than 3.4 GW. Spain and the United States remained the global leaders, while the number of countries with installed CSP were growing but the rapid decrease in price of PV solar, policy changes and the global financial crisis stopped most development in these countries. 2014 was the best year for CSP but was followed by a rapid decline with only one major plant completed in the world in 2016. There is a notable trend towards developing countries and regions with high solar radiation with several large plants under construction in 2017.CSP is also increasingly competing with the cheaper photovoltaic solar power and with concentrator photovoltaics, a fast-growing technology that just like CSP is suited best for regions of high solar insolation. In addition, a novel solar CPV/CSP hybrid system has been proposed recently.
Efficiency
The efficiency of a concentrating solar power system will depend on the technology used to convert the solar power to electrical energy, the operating temperature of the receiver and the heat rejection, thermal losses in the system, and the presence or absence of other system losses; in addition to the conversion efficiency, the optical system which concentrates the sunlight will also add additional losses.Real-world systems claim a maximum conversion efficiency of 23-35% for "power tower" type systems, operating at temperatures from 250-565 °C, with the higher efficiency number assuming a combined cycle turbine. Dish Stirling systems, operating at temperatures of 550-750 °C, claim an efficiency of about 30%. Due to variation in sun incidence during the day, the average conversion efficiency achieved is not equal to these maximum efficiencies, and the net annual solar-to- electricity efficiencies are 7-20% for pilot power tower systems, and 12-25% for demonstration-scale Stirling dish systems.
Theory
The maximum conversion efficiency of any thermal to electrical energy system is given by the Carnot efficiency, which represents a theoretical limit to the efficiency that can be achieved by any system, set by the laws of thermodynamics. Real-world systems do not achieve the Carnot efficiency.The conversion efficiency of the incident solar radiation into mechanical work depends on the thermal radiation properties of the solar receiver and on the heat engine.
Solar irradiation is first converted into heat by the solar receiver with the efficiency and subsequently the heat is converted into mechanical energy by the heat engine with the efficiency, using Carnot's principle. The mechanical energy is then converted into electrical energy by a generator.
For a solar receiver with a mechanical converter, the overall conversion efficiency can be defined as follows:
where represents the fraction of incident light concentrated onto the receiver, the fraction of light incident on the receiver that is converted into heat energy, the efficiency of conversion of heat energy into mechanical energy, and the efficiency of converting the mechanical energy into electrical power.
is:
The conversion efficiency is at most the Carnot efficiency, which is determined by the temperature of the receiver and the temperature of the heat rejection ,
The real-world efficiencies of typical engines achieve 50% to at most 70% of the Carnot efficiency due to losses such as heat loss and windage in the moving parts.
Ideal case
For a solar flux concentrated times with an efficiency on the system solar receiver with a collecting area and an absorptivity :For simplicity's sake, one can assume that the losses are only radiative ones, thus for a reradiating area A and an emissivity applying the Stefan-Boltzmann law yields:
Simplifying these equations by considering perfect optics and without considering the ultimate conversion step into electricity by a generator, collecting and reradiating areas equal and maximum absorptivity and emissivity then substituting in the first equation gives
The graph shows that the overall efficiency does not increase steadily with the receiver's temperature. Although the heat engine's efficiency increases with higher temperature, the receiver's efficiency does not. On the contrary, the receiver's efficiency is decreasing, as the amount of energy it cannot absorb grows by the fourth power as a function of temperature. Hence, there is a maximum reachable temperature. When the receiver efficiency is null, Tmax is:
There is a temperature Topt for which the efficiency is maximum, i.e. when the efficiency derivative relative to the receiver temperature is null:
Consequently, this leads us to the following equation:
Solving this equation numerically allows us to obtain the optimum process temperature according to the solar concentration ratio
| C | 500 | 1000 | 5000 | 10000 | 45000 |
| Tmax | 1720 | 2050 | 3060 | 3640 | 5300 |
| Topt | 970 | 1100 | 1500 | 1720 | 2310 |
Theoretical efficiencies aside, real-world experience of CSP reveals a 25%–60% shortfall in projected production, a good part of which is due to the practical Carnot cycle losses not included in the above analysis.
Costs
As of 2017, new CSP power plants are economically competitive with fossil fuels in certain regions, such as Chile, Australia, and the Middle east and North Africa Region. Nathaniel Bullard, a solar analyst at Bloomberg New Energy Finance, calculated that the cost of electricity at the Ivanpah Solar Power Facility, a project contracted in 2009 and completed in 2014 in Southern California, would be lower than that from photovoltaic power and about the same as that from natural gas. However, due to the rapid price decline of photovoltaics, in November 2011, Google announced that they would not invest further in CSP projects. Google had invested US$168 million on BrightSource.IRENA has published in June 2012 a series of studies titled: "Renewable Energy Cost Analysis". The CSP study shows the cost of both building and operation of CSP plants. Costs are expected to decrease, but there are insufficient installations to clearly establish the learning curve.
By 2012, there was 1.9 GW of CSP installed, with 1.8 GW of that being parabolic trough. The US Department of Energy publishes the up to date list of at the National Renewable Energy Laboratory under a contract from SolarPACES, the international network of CSP researchers and industry experts. As of 2017, there is 5 GW of CSP installed globally, with most of that in Spain at 2.3 GW, and the US at 1.3 GW.
At the 2016 Chile auction, SolarReserve bid $63/MWh for 24-hour CSP power with no subsidies, competing with other types such as LNG gas turbines.
In 2017, prices for both bids and signed contracts fell rapidly by 50% from 9.4 cents per kWh in May, to under 5 cents in October. In May, Dubai Electricity and Water received bids at . In August DEWA signed a contract with Saudi-based ACWA Power at . In September, SolarReserve signed a contract at 6.1 cents per kWh, lower than the price of natural gas generation. In October 2017, SolarReserve bid into the 2017 Chilean Auction at 5 cents per kWh.
As of November 2017, prices in the MENA Region are at 7 cents per kWh or lower according to ACWA Power. The capital costs have fallen by 50% in last five years.
Incentives
Spain
Until 2012, solar-thermal electricity generation was initially eligible for feed-in tariff payments, if the system capacity does not exceed the following limits:- Systems registered in the register of systems prior to 29 September 2008: 500 MW for solar-thermal systems.
- Systems registered after 29 September 2008.
Since 27 January 2012, Spain has halted acceptance of new projects for the feed-in-tariff. Projects currently accepted are not affected, except that a 6% tax on feed-in-tariffs has been adopted, effectively reducing the feed-in-tariff.
Australia
At the federal level, under the Large-scale Renewable Energy Target, in operation under the Renewable Energy Electricity Act 2000, large scale solar thermal electricity generation from accredited RET power stations may be entitled to create large-scale generation certificates. These certificates can then be sold and transferred to liable entities to meet their obligations under this tradeable certificates scheme. However, as this legislation is technology neutral in its operation, it tends to favour more established RE technologies with a lower levelised cost of generation, such as large scale onshore wind, rather than solar thermal and CSP.At State level, renewable energy feed-in laws typically are capped by maximum generation capacity in kWp, and are open only to micro or medium scale generation and in a number of instances are only open to solar PV generation. This means that larger scale CSP projects would not be eligible for payment for feed-in incentives in many of the State and Territory jurisdictions.
China
As of 2018, China offers incentives to purchase the generated electricity from CSP plants with thermal storage at FiT of RMB 1.5 per kWh. Nearly 215 MW CSP plants with thermal storage were commissioned in the year 2018 taking the total installed capacity to 245 MW.India
In March 2020, SECI called for 5000 MW tenders which can be combination of Solar PV, Solar thermal with storage and Coal based power to supply round the clock power at minimum 80% yearly availability.Future
A study done by Greenpeace International, the European Solar Thermal Electricity Association, and the International Energy Agency's SolarPACES group investigated the potential and future of concentrated solar power. The study found that concentrated solar power could account for up to 25% of the world's energy needs by 2050. The increase in investment would be from €2 billion worldwide to €92.5 billion in that time period.Spain is the leader in concentrated solar power technology, with more than 50 government-approved projects in the works. Also, it exports its technology, further increasing the technology's stake in energy worldwide. Because the technology works best with areas of high insolation, experts predict the biggest growth in places like Africa, Mexico, and the southwest United States. It indicates that the thermal storage systems based in nitrates will make the CSP plants more and more profitable. The study examined three different outcomes for this technology: no increases in CSP technology, investment continuing as it has been in Spain and the US, and finally the true potential of CSP without any barriers on its growth. The findings of the third part are shown in the table below:
| Year | Annual Investment | Cumulative Capacity |
| 2015 | €21 billion | 4,755 MW |
| 2050 | €174 billion | 1,500,000 MW |
Finally, the study acknowledged how technology for CSP was improving and how this would result in a drastic price decrease by 2050. It predicted a drop from the current range of €0.23–0.15/kWh to €0.14–0.10/kWh.
The European Union looked into developing a €400 billion network of solar power plants based in the Sahara region using CSP technology to be known as Desertec, to create "a new carbon-free network linking Europe, the Middle East and North Africa". The plan was backed mainly by German industrialists and predicted production of 15% of Europe's power by 2050. Morocco was a major partner in Desertec and as it has barely 1% of the electricity consumption of the EU, it could produce more than enough energy for the entire country with a large energy surplus to deliver to Europe. Algeria has the biggest area of desert, and private Algerian firm Cevital signed up for Desertec. With its wide desert and its strategic geographical location near Europe, Algeria is one of the key countries to ensure the success of Desertec project. Moreover, with the abundant natural-gas reserve in the Algerian desert, this will strengthen the technical potential of Algeria in acquiring Solar-Gas Hybrid Power Plants for 24-hour electricity generation. Most of the participants pulled out of the effort at the end of 2014.
Other organizations had predicted CSP to cost $0.06/kWh by 2015 due to efficiency improvements and mass production of equipment. That would have made CSP as cheap as conventional power. Investors such as venture capitalist Vinod Khosla expect CSP to continuously reduce costs and actually be cheaper than coal power after 2015.
In 2009, scientists at the National Renewable Energy Laboratory and SkyFuel teamed to develop large curved sheets of metal that have the potential to be 30% less expensive than today's best collectors of concentrated solar power by replacing glass-based models with a silver polymer sheet that has the same performance as the heavy glass mirrors, but at much lower cost and weight. It also is much easier to deploy and install. The glossy film uses several layers of polymers, with an inner layer of pure silver.
Telescope designer Roger Angel has turned his attention to CPV, and is a partner in a company called Rehnu. Angel utilizes a spherical concentrating lens with large-telescope technologies, but much cheaper materials and mechanisms, to create efficient systems.
Experience with CSP technology in 2014–2015 at Solana in Arizona, and Ivanpah in Nevada indicate large production shortfalls in electricity generation between 25% and 40% in the first years of operation. Producers blame clouds and stormy weather, but critics seem to think there are technological issues. These problems are causing utilities to pay inflated prices for wholesale electricity, and threaten the long-term viability of the technology. As photovoltaic costs continue to plummet, many think CSP has a limited future in utility-scale electricity production.
China plans to have a total capacity of 5.3 GW of load following CSP power plants by 2022.
By 2018, the levelised cost of electricity from CSP with 15 hours storage in China was down to 0.1 US$/kWh.
China has reposed confidence in CSP technology for meeting its energy needs and taken global leadership to make CSP commercially competitive over other dispatchable generation.
CSP with thermal storage has clear advantage in cogeneration and heating applications as it can operate continuously at high efficiency.
CSP has other uses than electricity. Researchers are investigating solar thermal reactors for the production of solar fuels, making solar a fully transportable form of energy in the future. These researchers use the solar heat of CSP as a catalyst for thermochemistry to break apart molecules of H2O, to create hydrogen from solar energy with no carbon emissions. By splitting both H2O and CO2, other much-used hydrocarbons – for example, the jet fuel used to fly commercial airplanes – could also be created with solar energy rather than from fossil fuels.
Very large scale solar power plants
There have been several proposals for gigawatt size, very-large-scale solar power plants. They include the Euro-Mediterranean Desertec proposal and Project Helios in Greece, both now canceled. A 2003 study concluded that the world could generate 2,357,840 TWh each year from very large scale solar power plants using 1% of each of the world's deserts. Total consumption worldwide was 15,223 TWh/year. The gigawatt size projects would have been arrays of standard-sized single plants. In 2012, the BLM made available of land in the southwestern United States for solar projects, enough for between 10,000 and 20,000 GW. The largest single plant in operation is the 510 MW Noor Solar Power Station.Suitable sites
The locations with highest direct irradiance are dry, at high altitude, and located in the tropics. These locations have a higher potential for CSP than areas with less sun.Abandoned opencast mines, moderate hill slopes and crater depressions may be advantageous in the case of power tower CSP as the power tower can be located on the ground integral with the molten salt storage tank.
Environmental effects
CSP has a number of environmental effects, particularly on water use, land use and the use of hazardous materials.Water is generally used for cooling and to clean mirrors. Cleaning agents are also used for semiconductor surface cleaning. Some projects are looking into various approaches to reduce the water and cleaning agents use, including the use of barriers, non-stick coatings on mirrors, water misting systems, and others.
Effects on wildlife
Insects can be attracted to the bright light caused by concentrated solar technology, and as a result birds that hunt them can be killed by being burned if they fly near the point where light is being focused. This can also affect raptors who hunt the birds. Federal wildlife officials were quoted by opponents as calling the Ivanpah power towers "mega traps" for wildlife.According to rigorous reporting, in over six months, 133 singed birds were counted. By focusing no more than four mirrors on any one place in the air during standby, at Crescent Dunes Solar Energy Project, in three months, the death rate dropped to zero. Other than in the US, no bird deaths have been reported at CSP plants internationally.