Holden Commodore (VT)
The Holden Commodore is an executive car that was produced by the Australian manufacturer Holden from 1997 to 2000. It was the first iteration of the third generation of this Australian made model and the last one to be powered by a locally made V8 engine. Its range included the luxury variants, Holden Berlina and Holden Calais but not a new generation utility version.
Introduced in August 1997, the VT-series represented Holden's largest development yet. On debut, it won the 1997 Wheels Car of the Year award, resulting in the fourth time that this award was won by a Commodore. It found ready acceptance in the market as many buyers steered away from the more radically designed Ford Falcon, becoming the best selling Commodore and cementing its place as number one in Australian sales at its time.
A VT Series II was released in 1999, before being replaced by the restyled VX model in 2000. In 1998, the VT formed the basis of a prototype that became the catalyst for the reintroduction in 2001 of the Holden Monaro coupé—a nameplate on hiatus since 1977.
History of development
As with previous Commodore models, Holden looked to Opel in Germany for a donor car. The VT series was derived from the Omega B by broadening that vehicle's width and adapting the mechanical setup for Australian conditions. The alternative would have been to adopt the Omega as is, save for the engines and transmissions or just reskinning the second generation architecture.The VT series ended up being a development program that spanned more than half a decade. It sported many firsts for an Australian-built car, improved dynamics and increased crash safety also thanks to a body that was 30 percent stiffer than its predecessor, the VS series.
Its rounder exterior design, which made it more attractive to buyers than the more aerodynamic rival, Ford Falcon, was considered only a styling exercise with low emphasis on aerodynamics given the sedan's ordinary. At the time of the VY series launch in 2002, Holden aerodynamic engineers conceded that the design was not ideal, primarily because of the rounded trailing edge of the sedan's boot lid, which did not promote a clean separation of the airflow off the back of the car as would have a sharper change of angle. As such, the VY series rectified this problem.
In 1999, the VT wagon platform served as the basis for the second generation Statesman and Caprice luxury cars. This third generation Commodore also formed the basis for the resurrection of the iconic Monaro coupé from the 1960s and 1970s. Presented as the "Holden Coupé" concept car at the 1998 Australian International Motor Show held in Sydney. Overwhelming public interest resulted in the coupé finally reaching production in 2001 as the Monaro albeit by then based on the VX series.
As part of this project came a spend of to upgrade the Elizabeth plant, which saw a 43 percent increase in robots, more efficient pressing process and welding, reducing the VT's final assembly time by 2.5 hours.
Input from the United States
Holden's parent company was interested in incorporating a left-hand drive Commodore into the Buick lineup in the United States and became involved in the VT development cycle early on. Holden was provided funds for the necessary engineering changes and a prototype was unveiled to the American public in 1995 as the Buick XP2000 concept car whose styling formed the basis for the VT series. The project, known internally as "Project 127", was abandoned in early 1994, well before the VT's release but Holden made the most of the situation by exporting left-hand drive VTs to parts of Indochina and the Middle East badged as the Chevrolet Lumina, and to Brazil badged as the Chevrolet Omega.Engineering
The base engine was the 3.8-litre Ecotec V6 that Holden originally launched with the Commodore VS Series II, which remained unchanged except for new exhaust manifolds and the latest Bosch EV6 fuel injectors. Apart from the 5.0-litre Holden V8 and uprated HSV variants, the other engine offered as an option on the Commodore S and SS, and the Calais, was the supercharged version of the Ecotec that was also launched with the VS II. In its latest guise, it generated a higher output of thanks to a new engine management system with individual cylinder knock-sensor control. The available transmissions, depending on engine option, included a four-speed 4L60-E automatic and five-speed Getrag 260 manual on V6 models and the same automatic or five-speed Getrag 290 and optional six-speed Tremec T56 manuals on V8 models. The fuel tank of 75 litres was mounted ahead of the spare wheel floor cavity at the rear.Performance and fuel efficiency were compromised by the new body, which weighed more over the VS series due to its larger size—the sedan being respectively up in length, in width, in height and in wheelbase. The sedan's boot capacity was, up from the VS series', while the wagon's maximum was. The wagon was bigger still in the respective dimensions listed above by,, and. According to the VT's planning chief, Tony Hyde, the critical dimension was for the rear shoulder room that was believed to be needed to keep the Commodore range competitive. Inside, front passengers sit further apart and with more fore-aft seat travel, and the seats featured a new "Surebond" technique to bond seat facings to the backing foam to eliminate traditional sewing.
The VT series heralded the fitment of semi-trailing arm independent rear suspension as standard across the range. However, when originally carried over, the European design was simplified with the removal of the toe control link, standard equipment on the six-cylinder Omega since 1987.Ford Falcon AU "> This design was prone to distorting the suspension camber angle and toe under heavy loads, leading to excessive rear tyre wear. Holden's performance arm HSV re-added the toe control link on the flagship GTS 300 model, based on the Series II update.
Overall, the VT series was regarded a more neutral handler compared to the previous VS and most cars ran a stabiliser bar at the front, while the V8s with standard tyres and stiffer FE2 suspension tune had a stabilizer bar. At the rear, the V6 models had a stabilizer bar, the V6 Supercharged a 16mm, and the V8s a 17mm bar. A standard three-channel Bosch 5.3 anti-lock braking system was fitted across the range, with front discs measuring in diameter, while the rear's respective sizes were. Tyre sizes varied from 15-inch P205/65 for the Commodore Executive, Acclaim and Berlina, to 16-inch P215/60 for the Calais and P225/50 for the Commodore S, and the largest P235/45 on 17-inch wheels for the Commodore SS.
For the steering, the predominant system was a variable-ratio Bishop-design design. The Calais, instead, adopted a speed sensitive "Variotronic" mechanism, criticized for its overall feel. This and other new electronic systems were possible thanks to a multiplex communication bus. This setup was able to circulate 330 parameters per second to the car's major control modules, and reduce the number of hardwired circuits than if it had conventional wiring throughout. Anti-theft devices included an improved electronic immobiliser, stronger steering lock and latest slip-type locks throughout.
Inside, more than 90 percent of the VT's electrical and HVAC components were new over the VS, except for the carry-over column stalks. Safety wise, Holden relied on more computer simulations than ever before, resulting in only 20 VTs being physically crash tested, compared to 55 with the previous VR series. A driver side airbag was standard across all models, along with a passenger side optional only on the Commodore Executive and S. Side airbags with torso and head protection became an option for the Acclaim and higher models from 1998.
| Engine | Power | Torque | Transmission |
| 3791 cc Ecotec V6 |
| ||
| 3791 cc Supercharged Ecotec V6 | |||
| 4987 cc V8 | |||
| 4987 cc HSV V8 | |||
| 5665 cc Generation III V8 |
Models
The VT series was officially announced on 26 August 1997 and went on sale on 5 September replacing the VS Commodore. Its only major update, marketed as the VT Series II, was launched on 1 June 1999 and sold until October 2000, when the VX series was launched as its replacement.The original 1997 VT range was introduced with a range of six models comprising:
- Commodore Executive V6 manual from sedan and wagon, with optional automatic, and V8
- Commodore Acclaim V6 automatic from sedan and wagon
- Commodore S V6 manual from sedan only, with the option of the V6 Supercharged automatic 6.7 Secs 0-100
- Commodore SS V8 manual from sedan only, with optional automatic or V6 Supercharged automatic
- Berlina V6 automatic from sedan and wagon, with optional V8 automatic
- Calais V6 automatic from sedan only, with optional V8 automatic or V6 Supercharged automatic.
- Standard across the range – IRS, driver's airbag, seatbelt pre-tensioners, electric seat height and tilt adjuster, front seat lumbar support trip computer
- Passenger airbag available across the range, but as an optional on the Commodore Executive and S for
- ABS available across the range, but as an optional package on Executive
- Traction Control standard on Acclaim and Calais, but optional on the rest of the range for
- Automatic transmission optional on all models except Acclaim, Berlina and Calais
- Power steering standard across the range, with Calais featuring a speed sensitive version
- Air conditioning optional on Executive and Acclaim but standard on S and SS, with climate control on Berlina and Calais
- Alloy wheels optional on Executive and Acclaim but optional on all other models
- Full power electric windows and metallic paint standard on Berlina and Calais but optional on all other models
- Cruise control standard on all automatic models except for being optional on Executive
- Fabric seat trim on all models except for velour on Berlina and Calais, with leather trim optional on the latter
- A double-DIN 6-speaker 30W sound system with cassette player across the range except for Calais featuring 8-speakers, and CD players optional on all models except being standard on Berlina and Calais also featuring a power antenna with height memory
- For Calais – automatic light-sensing headlights, personalised key system, dual zone climate control and eight way powered front seats with lumbar
- For Calais, S and SS a leather wrapped steering wheel optional on all other models
- For S and SS models, a rear wing spoiler and FE2 sport suspension optional on all other models
- For SS-only, sports seats and a standard limited slip differential optional on all other models
- Sunroof optional on all models.
The range colours included: Heron, Rubens Mica, Capricorn Mica, Raven Mica, Orion Frost, Valencia Mica, Tundra Mica, Botanica Mica, Granada Mica, Morocco Sand Frost, Bermuda Mica.
Special editions included the following:
- 1998 Commodore 50th Anniversary sedan and wagon
- 1998 Calais 50th Anniversary
- 1999 Commodore Equipe
- 1999–2000 Commodore Olympic edition
- 2000 Calais International.
Series II
With the VT Series II upgrade of 1999, the Ecotec V6 remained structurally unchanged, but it received an updated tune that made the car slightly faster than the original version. The availability of the supercharged V6 changed by no longer being available on the Commodore SS and becoming optional on the Berlina, but standard on the Calais. The venerable 5.0-litre Holden V8 was instead replaced by a new 5.7-litre Gen III V8 sourced from the United States.. The VT II in Gen III V8 guise was claimed by Wheels in 1999 to be the fastest Australian car ever. The V8 was detuned to from the original version, but would receive incremental power upgrades to throughout its time in the Commodore.Cosmetically, all Series II VT models received slightly revised wheel covers and alloys, front grilles as well as clear side and rear indicator lenses instead of the previous amber. The updated Calais now also featured a chrome strip across the boot garnish above the number plate, to distinguish it from the lower model variants.
Holden Ute
Unlike in the case of its other new generation platforms, which saw Holden release a utility version concurrent to other mainstream body shapes, a VT utility version was never developed. Instead, Holden continued to sell the VS Commodore utility version until December 2000, at which time the Holden Ute was released. This vehicle was based on the long wheelbase platform of the VX Commodore, itself launched in October 2000 as the first significant facelift of the VT series.HSV range
The enhanced performance range of the original VT-based range sold by Holden Special Vehicles comprised the following variants:- Manta sedan with a 5.0-litre 195 kW V8 5-speed manual or optional 4-speed automatic
- Clubsport sedan with a 5.0-litre 195 kW V8 5-speed manual or optional 4-speed automatic
- GTS sedan with a 5.7-litre 220 kW V8 or optional 230 kW version 6-speed manual or optional 4-speed automatic
- Senator sedan with a 5.7-litre 220 kW V8 or optional 230 kW version 4-speed automatic with the 5- or 6-speed manual option
- Senator Signature sedan with a 5.7-litre 220 kW V8 or optional 230 kW version 4-speed automatic with the 5- or 6-speed manual option
- Senator Estate wagon with a 5.7-litre 220 kW V8 or optional 230 kW version 4-speed automatic only.
;Clubsport
Launched in 1997, the HSV VT Clubsport was much larger and heavier than its predecessors. Critics noted that its engine, a 5.0-litre V8, was also available as an option on the Commodore SS, making the Clubsport less exclusive and desirable. The VT Clubsport did feature many luxury features, including a CD player, steering wheel, front seats and foglights.
The VT Series II was released in 1999 to replace the standard Clubsport. It featured a new 5.7-litre V8 LS1 Gen III engine, sourced from GM Powertrain, producing. Production ceased in 2000.
- Series 2 VT Clubsport rebadged as GTS for the UK market
- Series 1 VT GTS – 161 produced – 126 manual, remainder automatic
- Series 2 VT GTS – 100 produced
- Series 2 VT GTSR - 15 produced for the UK market
Introduced in 1997, the VT Senator Signature gained the larger all-new bodyshell of the VT Commodore and also heralded the introduction of a Senator Signature wagon for the first time into the HSV range. An upgraded 5.0-litre and 5.7-litre V8 engines were offered. The VT Senator Signature came standard with speed-sensitive steering which would act in different ways depending on the road and surrounding conditions and luxury suspension tuned featuring Monroe Sensatrac shock absorbers. Appearance differed from other HSV models with the use of a chrome single-slat grille, side skirts, front fog lamps and 10-spoke, 17-inch alloy wheels. The suspension was lowered, with leather seats and woodgrain standard throughout the Senator Signature.
The steering featured the Variatronic power assisted rack and pinion technology. The independent rear suspension and luxury front and rear Sensatrac variable rate dampers fitted made for smooth ride control and high speed stability. Additionally, HSV added complementary special features which were for the driver rather than the car, such as a Maglite torch, wheel nut cap remover and a multi-purpose pen knife. The VT Series II introduced a new 5.7-litre LS1 V8 which produced and.
A choice of two transmissions were offered a 6-speed manual and 4-speed automatic. Front and side airbags, climate control air-conditioning and traction control are some of the features that come as standard. By activating a certain button in the cabin labelled "power" the automatic transmission holds the gears in longer, this gives the car more acceleration power. Storage wise the cabin offers, pockets behind the seats, door pockets, a large glove box and a console bin plus the larger boot.
The Senator Signature Estate Wagon had two versions available with this version the 195i and the 220i these was known by the badges found on the rear. The numbers that were chosen was to illustrate the power the cars had. Some of the optional features included an upgraded braking system, rain sensing wipers and luxury tuned suspension. Leather featured heavily throughout the vehicle and dual climate control was to enhance comfort for the passengers throughout the large wagon. A special entertainment audio system is only available as an extra option it includes a Premium audio pack with 350 kilowatt power amp and 6 stack CD. There is an optional Coulson 'performance' front seating which is for extra comfort. The wheels are 10-spoke, 17-inch alloy wheels.
Exports
Exports of the VT to the Middle East, rebadged as the Chevrolet Lumina, began in 1998.In addition, General Motors do Brasil also imported the VT as the Chevrolet Omega from October 1998 to replace the same-named predecessor that was a rebadged Opel Omega A. The Brazilian model sold as a single-specification CD model, based on the Holden Calais automatic powered by the Ecotec 3.8-litre V6 engine. The VT II model came to Brazil in December 1999. VT Omega sales ended in 2001 when replaced by the VX-based model, as announced on 18 May 2001.