Rotary snowplow


A rotary snowplow is a piece of railroad snow removal equipment with a large circular set of blades on its front end that rotate to cut through the snow on the track ahead of it. The precursor to the rotary snowplow was the wedge snowplow.

History

The rotary was invented in Toronto, Canada, by dentist J.W. Elliot in 1869. He never built a working model or prototype, although he wanted to. Orange Jull of Orangeville, Ontario, expanded on Elliot's design, building working models he tested with sand. During the winter of 1883–1884, Jull contracted with the Leslie Brothers of Toronto to build a full-size prototype that proved successful. Jull later sold his design rights to Leslie Brothers, who formed the Rotary Steam Shovel Manufacturing Company in Paterson, New Jersey. Leslie Brothers contracted with Cooke Locomotive & Machine Works in Paterson to do the actual construction.
Another inventor is said to be Col. Lewis P. Campbell. He is listed in US patent 1848554.

Operation

were the traditional mechanized method of clearing snow from railroad tracks. These pushed snow off the tracks, deflecting it to the side. Deeper drifts cannot easily be cleared by this method; there is simply too much snow to be moved. For this purpose, the rotary snowplow was devised.
.
Rotary plows are often deployed when snow is too deep or hard-packed for traditional plows. The ability to operate slowly, as there is no requirement for train momentum to break up the snow, is often an advantage in mountainous regions, where a high speed derailment could be disastrous. Many rotary plows are not self-propelled, so one or more locomotives are coupled behind it to push the plow along the line. An engine within the plow's carbody rotates the large circular assembly at the front of the plow. The blades on this wheel cut through the snow and force it through a channel just behind the disk to an output chute above the blade assembly.
The chute can be adjusted to throw the snow to either the left or the right side of the tracks. An operator sits in a cab just above and behind the blade assembly to control the speed of the blades and the direction of output from the chute. With the increasing prevalence of diesel locomotives, multiple-unit train controls have been added to the cabs, so that the pushing locomotives can be controlled from the plow.
In areas of particularly deep snowfall, such as California's Donner Pass, railroads sometimes created a train consisting of a rotary snowplow at each end, with the blade ends pointing away from each other, and two or three locomotives coupled between them. With a plow on each end, the train was able to return to its starting location even if the snow covered the tracks it had just passed over. Such a train would also be able to clear multiple track mainlines efficiently as it could make a pass in one direction on one track, then reverse direction and clear the next track. This practice became standard for the Southern Pacific Railroad on Donner Pass following the January 1952 stranding of the City of San Francisco train; during attempts to clear the avalanches that had trapped the train, two rotary plows were themselves trapped by avalanches, and the crew of a third was killed when their plow was hit by an avalanche.
Rotary snowplows are expensive due to their high maintenance costs, which the railroad incurs regardless of whether they are needed in a given year. As a result, most railroads have eliminated their rotaries, preferring to use a variety of types of fixed-blade plows that have significantly lower maintenance costs, in conjunction with bulldozers, which can be used year-round on maintenance-of-way projects. In addition, because rotaries leave an open-cut in the snowbank that fixed-blade plows cannot push snow past, once rotaries have been used, they must be used for all further significant snowfalls until the snowbank has melted. Since rotaries, which need some form of fuel to power the blades, also cost more to operate than fixed-blade plows, they are now generally considered to be a tool of last resort for the railroads that own them.
The few remaining rotary plows in North America are either owned by museum railroads, or are kept in reserve for areas with poor road access and routine severe snowfall conditions. The largest remaining fleet of rotaries consists of Union Pacific Railroad's six ex-Southern Pacific plows reserved for Donner Pass. Japan sees widespread use of rotary snowplows in its many mountain passes.

Power

Early rotaries had steam engines inside their car bodies to power the blades; a few are still in working order, and in particular one on the White Pass & Yukon Route in Alaska performs annual demonstration runs through thick snow for the benefit of photographers and railway enthusiasts. Rotaries of newer construction are either diesel- or electric-powered. Many steam plows were converted to electricity. Some electric plows can take their power from a locomotive, while others are semi-permanently coupled to power units, generally old locomotives with their traction motors removed; these are colloquially called "snails."

Hall of Fame induction

In 2001, the rotary snowplow was inducted into the North America Railway Hall of Fame. The hall of fame recognizes and establishes an enduring tribute to the people and things that have made significant contribution relating to railway industry in North America. The rotary snowplow was inducted in the "Technical Innovations" category with "National" significance.

Preservation

rotary snowplow MW205 is preserved as a static display at the California State Railroad Museum in Sacramento Old Town, California. This rotary was involved in the rescue of the City of San Francisco' train from January 13 to 19, 1952. During its history, it was renumbered several times. The eventual SP MW #205 was built by ALCO Cooke Works, Paterson NJ as a coal burning unit.
January 22, 1921: Future MW #205 was placed in service by SP in Sacramento as #715 and converted to oil.
March 8, 1931: #715 was renumbered as #706.
November 23, 1931: #706 was renumbered as #7205 part of all SP snow plows.
January 1952: #7205 was one of the snowplows involved in rescuing the City of San Francisco train, stuck near Emigrant Gap.
1957: SP #7210 first rotary rebuilt from steam to electric power, using power from trailing F7B unit.
1958: SP #7205 rebuilt from steam to electric power.
1962: #7205 renumbered to SP MW #205
1996: SP becomes part of UP.
2004, Oct 23: After sitting at Truckee on standby, SP MW #205 is retired and delivered to CSRM by UP.
2008, Mar 10: MW #205 is formally donated to CSRM.
Southern Pacific rotary snowplow MW208 is preserved in operational condition at the Western Pacific Railroad Museum at Portola, California. This rotary was involved in the rescue of the City of San Francisco train in 1952.
The Lake Superior Railroad Museum in Duluth, Minnesota and the Museum of Transportation in St. Louis, Missouri each have one on display.
The in Breckenridge, Colorado has a 1901 snowplow used originally for the White Pass and Yukon Route in Alaska.
The Northern Pacific Rotary 10 steam snowplow built in November, 1907 is owned by the Northwest Railway Museum and is on display in Snoqualmie, Washington.
Rhaetian Railway still have one of their rotary snowplows in operating condition. It is mainly used on show runs for photographers, but when there is heavy snow it is still used to clear the Bernina line.
Union Pacific Railroad's UP 900860 rotary snowplow rests at Union Station in Ogden, Utah. The snowplow is not in working condition. Unit number 900081 is displayed at the Museum of Transportation in St. Louis, Missouri. Unit # 900075 is displayed at the Illinois Railway Museum in Union, Illinois. Unit # 900076 and Unit # 900083 are on display at Maxwell Siding In Hermiston, Oregon.
The Henschel rotary steam snowplow ÖBB 986.101 is preserved nonoperational at the Deutsches Technikmuseum Berlin in Germany. It was built in 1943.
Long Island Railroad steam rotary #193, purported to be the last surviving steam rotary plow ever used East of the Mississippi River, is displayed at Steamtown National Historic Site in Scranton, PA.
Alaska Railroad rotary snowplow #4, built by Alco, is displayed at the Potter Section House State Historic Site south of Anchorage.
The Colorado Railroad Museum features Colorado & Southern Rotary Snowplow No. 99201 in their collection in Golden, CO.