In crystallography, materials science and metallurgy, Vegard's law is an empiricalfinding resembling the rule of mixtures. In 1921, Vegard discovered that the lattice parameter of a solid solution of two constituents is approximately a weighted mean of the two constituents' lattice parameters at the same temperature: e.g., in the case of a mixed oxide of uranium and plutonium as used in the fabrication of MOX nuclear fuel: Vegard's law assumes that both components A and B in their pure form have the same crystal structure. Here, is the lattice parameter of the solid solution, and are the lattice parameters of the pure constituents, and is the molar fraction of B in the solid solution. Vegard's law is seldom perfectly obeyed; often deviations from the linear behavior are observed. A detailed study of such deviations was conducted by King. However, it is often used in practice to obtain rough estimates when experimental data are not available for the lattice parameter for the system of interest. For systems known to approximately obey Vegard's law, the approximation may also be used to estimate the composition of a solution from knowledge of its lattice parameters, which are easily obtained from diffraction data. For example, consider the semiconductor compound. A relation exists between the constituent elements and their associated lattice parameters,, such that: When variations in lattice parameter are very small across the entire composition range, Vegard's law becomes equivalent to Amagat's law.
In many binary semiconducting systems, the band gap in semiconductors is approximately a linear function of the lattice parameter. Therefore, if the lattice parameter of a semiconducting system follows Vegard's law, one can also write a linear relationship between the band gap and composition. Using as before, the band gap energy,, can be written as: Sometimes, the linear interpolation between the band gap energies is not accurateenough, and a second term to account for the curvature of the band gap energies as a function of composition is added. This curvature correction is characterized by the bowing parameter, :
Mineralogy
The following excerpt from Takashi Fujii summarises well the limits of the Vegard’s law in the context of mineralogy and also makes the link with the Gladstone–Dale equation: