Keyboard layout


A keyboard layout is any specific mechanical, visual, or functional arrangement of the keys, legends, or key-meaning associations of a computer, typewriter, or other typographic keyboard.
Mechanical layout is the placements and keys of a keyboard. Visual layout is the arrangement of the legends that appear on the keys of a keyboard. Functional layout is the arrangement of the key-meaning association or keyboard mapping, determined in software, of all the keys of a keyboard.
Modern computer keyboards are designed to send a scancode to the operating system when a key is pressed, which is not necesarily the specific character engraved on that key. The OS converts the scancode into a specific binary character code using a "scancode to character" conversion table, called the keyboard mapping table. This means that a physical keyboard may be dynamically mapped to any layout without switching hardware components – merely by changing the software that interprets the keystrokes. Often, a user can change keyboard mapping in system settings. In addition, software may be available to modify or extend keyboard functionality. Thus the symbol shown on the physical key-top need not be the same as what goes into a document being typed.

Key types

A computer keyboard consists of alphanumeric or character keys for typing, modifier keys for altering the functions of other keys, navigation keys for moving the text cursor on the screen, function keys and system command keys – such as and – for special actions, and often a numeric keypad to facilitate calculations.
There is some variation between different keyboard models in the mechanical layout – i.e., how many keys there are and how they are positioned on the keyboard. However, differences between national layouts are mostly due to different selections and placements of symbols on the character keys.

Character keys

The core section of a keyboard consists of character keys, which can be used to type letters and other characters. Typically, there are three rows of keys for typing letters and punctuation, an upper row for typing digits and special symbols, and the on the bottom row. The positioning of the character keys is similar to the keyboard of a typewriter.

Modifier keys

Besides the character keys, a keyboard incorporates special keys that do nothing by themselves but modify the functions of other keys. For example, the key can be used to alter the output of character keys, whereas the , and keys trigger special operations when used in concert with other keys..
Typically, a modifier key is held down while another key is struck. To facilitate this, modifier keys usually come in pairs, one functionally identical key for each hand, so holding a modifier key with one hand leaves the other hand free to strike another key.
An alphanumeric key labelled with only a single letter can generally be struck to type either a lower case or capital letter, the latter requiring the simultaneous holding of the key. The key is also used to type the upper of two symbols engraved on a given key, the lower being typed without using the modifier key.
The Latin alphabet keyboard has a dedicated key for each of the letters A–Z, keys for punctuation and other symbols, usually a row of function keys, often a numeric keypad and some system control keyns. In most languages except English, additional letters are required and some are present as standard on each national keyboard, as appropriate for its national language. These keyboards have another modified key, labelled , to the right of the space-bar.. It can be used to type an extra symbol in addition to the two otherwise available with an alphanumeric key, and using it simultaneously with the key usually gives access to a fourth symbol. These third-level and fourth-level symbols may be engraved on the right half of the key top, or they may be unmarked. Cyrillic alphabet and Greek alphabet keyboards have similar arrangements.
Instead of the, and keys seen on commodity keyboards, Apple Keyboards have and keys. The key is used much like the, and the key like the and, to access menu options and shortcuts. Macs have a key for compatibility with programs that expect a more traditional keyboard layout. It is especially useful when using a terminal, X11 or MS Windows. The key can generally be used to produce a secondary mouse click as well. There is also a key on modern Mac keyboards, which is used for switching between use of the,, etc. keys either as function keys or for other functions like media control, accessing dashboard widgets, controlling the volume, or handling exposé. key can be also found on smaller Windows and Linux laptops and tablets, where it serves a similar purpose.
Many Unix workstations keyboards placed the key to the left of the letter, and the key in the bottom left. This position of the key is also used on the XO laptop, which does not have a. The UNIX keyboard layout also differs in the placement of the key, which is to the left of.
Some early keyboards experimented with using large numbers of modifier keys. The most extreme example of such a keyboard, the so-called "Space-cadet keyboard" found on MIT LISP machines, had no fewer than seven modifier keys: four control keys,,,, and, along with three shift keys,,, and. This allowed the user to type over 8000 possible characters by playing suitable "chords" with many modifier keys pressed simultaneously.

Dead keys

A dead key is a special kind of a modifier key that, instead of being held while another key is struck, is pressed and released before the other key. The dead key does not generate a character by itself, but it modifies the character generated by the key struck immediately after, typically making it possible to type a letter with a specific diacritic. For example, on some keyboard layouts, the grave accent key is a dead key: in this case, striking and then results in ; followed by results in . A grave accent in isolated form can be typed by striking and then.
A key may function as a dead key by default, or sometimes a normal key can temporarily be altered to function as a dead key by simultaneously holding down the secondary-shift key – or : a typical example might be will produce . In some systems, there is no indication to the user that a dead key has been struck, so the key appears dead, but in some text-entry systems the diacritical mark is displayed along with an indication that the system is waiting for another keystroke: either the base character to be marked, an additional diacritical mark, or to produce the diacritical mark in isolation.
Compared with the secondary-shift modifier key, the dead-key approach may be a little more complicated, but it allows more additional letters. Using AltGr, only one or two additional letters with each key, whereas using a dead key, a specific diacritic can be attached to a range of different base letters.

Compose key

A Compose key can be characterized as a generic dead key that may in some systems be available instead of or in addition to the more specific dead keys. It allows access to a wide range of predefined extra characters by interpreting a whole sequence of keystrokes following it. For example, striking followed by and then results in á, followed by and then results in æ, and followed by and then results in ©.
The key is supported by the X Window System. Some keyboards have a key labeled "Compose", but any key can be configured to serve this function. For example, the otherwise redundant right-hand key may, when available, be used for this purpose. This can be emulated in Windows with third party programs, for example Wincompose.

History

Keyboard layouts have evolved over time, usually alongside major technology changes. Particularly influential have been: the Sholes and Glidden typewriter, the first commercially successful typewriter, which introduced [|QWERTY]; its successor, the Remington No. 2, which introduced the shift key; the IBM Selectric, a very influential electric typewriter, which was imitated by computer keyboards; and the IBM PC, namely the Model M, which is the basis for many modern keyboard layouts.
Within a community, keyboard layout is generally quite stable, due to the high training cost of touch-typing, and the resulting network effect of having a standard layout and high switching cost of retraining, and the suboptimal QWERTY layout is a case study in switching costs. Nevertheless, significant market forces can result in changes, and non-core keys are more prone to change, as they are less frequently used and less subject to the lock-in of touch-typing. The main, alphanumeric portion is typically stable, while symbol keys and shifted key values change somewhat, modifier keys more so, and function keys most of all: QWERTY dates to the No. 1 , shifted keys date in some cases to the No. 2, in other cases to the Selectric, and modifier key placement largely dates to the Model M ; function key placement typically dates to the Model M, but varies significantly, particularly on laptops.
The earliest mechanical keyboards were used in musical instruments to play particular notes. With the advent of the printing telegraph, a keyboard was needed to select characters. Some of the earliest printing telegraph machines used a layout similar to a piano keyboard.
In countries using the Latin script, the center, alphanumeric portion of the modern keyboard is most often based on the QWERTY design by Christopher Sholes, who laid out the keys in such a way that common two-letter combinations were placed on opposite sides of the keyboard so that his mechanical keyboard would not jam, and laid out the keys in rows offset horizontally from each other by three-eighths, three-sixteenths, and three-eighths inches to provide room for the levers. Although it has been demonstrated that the QWERTY layout is not the most efficient layout for typing, it remains the standard.
Sholes chose the size of the keys to be on three-quarter inch centers. 0.75 inches has turned out to be optimum for fast key entry by the average size hand, and keyboards with this key size are called "full-sized keyboards".
On a manual typewriter, the operator could press the key down with a lighter touch for such characters as the period or comma, which did not occupy as much area on the paper. Since an electric typewriter supplied the force to the typebar itself after the typist merely touched the key, the typewriter itself had to be designed to supply different force for different characters. To simplify this, the most common layout for electric typewriters in the United States differed from that for the one most common on manual typewriters. Single-quote and double-quote, instead of being above the keys for the digits 2 and 8 respectively, were placed together on a key of their own. The underscore, another light character, replaced the asterisk above the hyphen.
The ASCII communications code was designed so that characters on a mechanical teletypewriter keyboard could be laid out in a manner somewhat resembling that of a manual typewriter. This was imperfect, as some shifted special characters were moved one key to the left, as the number zero, although on the right, was low in code sequence. Later, when computer terminals were designed from less expensive electronic components, it wasn't necessary to have any bits in common between the shifted and unshifted characters on a given key. This eventually led to standards being adopted for the "bit-pairing" and "typewriter-pairing" forms of keyboards for computer terminals.
The typewriter-pairing standard came under reconsideration, on the basis that typewriters have many different keyboard arrangements. The U.S. keyboard for the IBM PC, although it resembles the typewriter-pairing standard in most respects, differs in one significant respect: the braces are on the same two keys as the brackets, as their shifts. This innovation predated the IBM Personal Computer by several years.
The standard 101/102-key PC keyboard layout was invented by Mark Tiddens of Key Tronic Corporation in 1982. IBM adopted the layout on the PS/2 in 1987.
Most modern keyboards basically conform to the layout specifications contained in parts 1, 2, and 5 of the international standard series ISO/IEC 9995. These specifications were first defined by the user group at AFNOR in 1984 working under the direction of Alain Souloumiac. Based on this work, a well known ergonomic expert wrote a report which was adopted at the ISO Berlin meeting in 1985 and became the reference for keyboard layouts.
The 104/105-key PC keyboard was born when two keys and a key were added on the bottom row. Newer keyboards may incorporate even further additions, such as Internet access keys and multimedia buttons.

Mechanical, visual, and functional layouts

As noted before, the layout of a keyboard may refer to its mechanical, visual, or functional layout.

Mechanical layouts

Mechanical layouts only address tangible differences among keyboards. When a key is pressed, the keyboard does not send a message such as the A-key is depressed but rather the left-most main key of the home row is depressed. The keyboard and the computer each have no information about what is marked on that key, and it could equally well be the letter A or the digit 9. The user of the computer is requested to identify the functional layout of the keyboard when installing or customizing the operating system.
Today, most keyboards use one of three different mechanical layouts, usually referred to as simply ISO, ANSI, and JIS, referring roughly to the organizations issuing the relevant worldwide, United States, and Japanese standards, respectively. Keyboard layout in this sense may refer either to this broad categorization or to finer distinctions within these categories. For example,, Apple Inc produces ISO, ANSI, and JIS desktop keyboards, each in both extended and compact forms. The extended keyboards have 110, 109, and 112 keys, and the compact models have 79, 78, and 80.

Visual layouts

A Visual layout refers to the symbols printed on the physical keycaps. Visual layouts vary by language, country, and user preference, and any one mechanical and functional layout can be employed with a number of different visual layouts. For example, the "ISO" keyboard layout is used throughout Europe, but typical French, German, and UK variants of mechanically identical keyboards appear different because they bear different legends on their keys. Even blank keyboards – with no legends – are sometimes used to learn typing skills or by user preference.
Some users choose to attach custom labels on top of their keycaps. This can be e.g. for masking foreign layouts, adding additional information such as shortcuts, learning aid, gaming controls, or solely for decorational purposes.

Functional layouts

The functional layout of the keyboard refers to the mapping between the physical keys, such as the key, and software events, such as the letter "A" appearing on the screen. Usually the functional layout is set to match the visual layout of the keyboard being used, so that pressing a key will produce the expected result, corresponding to the legends on the keyboard. However, most operating systems have software that allow the user to easily switch between functional layouts, such as the language bar in Microsoft Windows. For example, a user with a Swedish keyboard who wishes to type more easily in German may switch to a functional layout intended for German – without regard to key markings – just as a Dvorak touch typist may choose a Dvorak layout regardless of the visual layout of the keyboard used.

Customized functional layouts

Functional layouts can be redefined or customized within the operating system, by reconfiguring operating system keyboard driver, or with a use of a separate software application. Transliteration is one example of that whereby letters in other language get matched to visible Latin letters on the keyboard by the way they sound. Thus, a touch typist can type various foreign languages with a visible English-language keyboard only.
Mixed hardware-to-software keyboard extensions exist to overcome above discrepancies between functional and visual layouts. A keyboard overlay is a plastic or paper masks that can be placed over the empty space between the keys, providing the user with the functional use of various keys. Alternatively, a user applies keyboard stickers with an extra imprinted language alphabet and adds another keyboard layout via language support options in the operating system. The visual layout of any keyboard can also be changed by simply replacing its keys or attaching labels to them, such as to change an English-language keyboard from the common QWERTY to the Dvorak layout, although for touch typists, the placement of the tactile bumps on the home keys is of more practical importance than that of the visual markings.
In the past, complex software that mapped many non-standard functions to the keys would be shipped with a "keyboard overlay", a large sheet of paper with pre-cut holes matching the key layout of a particular model of computer. When placed over the keyboard, the overlay provided a quick visual reference as to what each key's new function was, without blocking the keys or permanently modifying their appearance. The overlay was often made from good-quality laminated paper and was designed to fold up and fit in the game's packaging when not in use.

National variants

The U.S. IBM PC keyboard has 104 keys, while the PC keyboards for most other countries have 105 keys. In an operating system configured for a non-English language, the keys are placed differently. For example, keyboards designed for typing in Spanish have some characters shifted, to release space for Ñ/ñ; similarly those for French or Portuguese may have a special key for the character Ç/ç. Keyboards designed for Japanese may have special keys to switch between Japanese and Latin scripts, and the character ¥ instead of \. Using a keyboard for alternative languages leads to a conflict: the image on the key does not correspond to the character. In such cases, each new language may require an additional label on the key, because the standard keyboard layouts do not even share similar characters of different languages.
The United States keyboard layout is used as default in some Linux distributions.
Most operating systems allow switching between functional keyboard layouts, using a key combination involving register keys that are not used for normal operations. There are keyboards with two parallel sets of characters labeled on the keys, representing alternate alphabets or scripts. It is also possible to add a second set of characters to a keyboard with keyboard stickers manufactured by third parties.

Size variation

Modern keyboard models contain a set number of total keys according to their given standard, described as 104, 105, etc. and sold as "Full-size" keyboards. This number is not always followed, and individual keys or whole sections are commonly skipped for the sake of compactness or user preference. The most common choice is to not include the numpad, which can usually be fully replaced by the alphanumeric section. Laptops and wireless peripherals often lack duplicate keys and ones seldom used. Function- and arrow keys are nearly always present.

QWERTY-based Latin-script keyboard layouts

Although there are a large number of keyboard layouts used for languages written with Latin-script alphabets, most of these layouts are quite similar. They can be divided into three main families according to where the,,,, and keys are placed on the keyboard. These are usually named after the first six letters.
While the core of the keyboard, the alphabetic section, remains fairly constant, and the numbers from 1–9 are almost invariably on the top row, keyboards differ vastly in:
The actual mechanical keyboard is of the basic ISO, ANSI, or JIS type; functioning is entirely determined by operating-system or other software. It is customary for keyboards to be used with a particular software keyboard mapping to be engraved appropriately; for example, when the and numeric keys are pressed simultaneously on a US keyboard; "@" is generated, and the key is engraved appropriately. On a UK keyboard this key combination generates the double-quote character, and UK keyboards are so engraved.
In the keyboard charts listed below, the primary letters or characters available with each alphanumeric key are often shown in black in the left half of the key, whereas characters accessed using the key appear in blue in the right half of the corresponding key. Symbols representing dead keys usually appear in red.

QWERTY

By far the most widespread layout in use, and the only one that is not confined to a particular geographical area. Some varieties have keys like and not translated to the language of the keyboard in question. In other varieties such keys have been translated, like and, on Spanish computer keyboards respectively for the example above. On Macintosh computers these keys are usually just represented by symbols without the word "Enter", "Shift", "Command", "Option/Alt" or "Control", with the exception of keyboards distributed in the US and East Asia.

QÜERTY (Azeri)

keyboards use a layout known as QÜERTY, where Ü appears in place of W above S, with W not being accessible at all. It is supported by Microsoft Windows.

ÄWERTY (Turkmen)

keyboards use a layout known as ÄWERTY, where Ä appears in place of Q above A, Ü appears in place of X below S, Ç appears in place of C, and Ý appears in place of V, with C, Q, V, and X not being accessible at all. It is supported by Microsoft Windows.

[|QWERTZ]

The QWERTZ layout is the normal keyboard layout in Germany, Austria and Switzerland. It is also fairly widely used in Czechia, Slovakia and other parts of Central Europe. The main difference between it and QWERTY is that and are swapped, and some special characters such as brackets are replaced by diacritical characters like Ä, Ö, Ü, ß. In Czechia and Slovakia diacritical characters like Ě, Š, Č, Ř, Ž, Ý, Á, Í also replace numbers. Caps lock is usually a shift lock as in AZERTY.

AZERTY

The AZERTY layout is used in France, Belgium, and some African countries. It differs from the QWERTY layout thus:
keyboards use a layout known as ĄŽERTY, where Ą appears in place of Q above A, Ž in place of W above S, and Ū in place of X below S, with Q, W, and X being available either on the far right-hand side or by use of the AltGr key. Besides ĄŽERTY, the Lithuanian QWERTY keyboard is also used.

QZERTY

The QZERTY layout was used mostly in Italy, where it was the traditional typewriter layout. In recent years, however, a modified QWERTY layout with stressed keys such as à, è, ò, has gained widespread usage throughout Italy. Computer keyboards usually have QWERTY, although non-alphanumeric characters vary.
Apple supported QZERTY layout in its early Italian keyboards, and currently iPod Touch also has it available.

Sámi Extended

keyboards use a layout known as the Sámi Extended, where Á appears in place of Q above A, Š appears in place of W above S, Č appears in place of X to the left of C, and Ŧ appears in place of Y to the right of T, with Q, W, X, and Y being available by use of the AltGr key. Also, Å is to the right of P, Ŋ is to the right of Å, and Đ is to the right of Ŋ. It is different in Norway than in Sweden and Finland, because of the placement of the letters different between Norwegian and Swedish/Finnish, which are placed where they match the standard keyboard for the main language spoken in the country. It is supported by Microsoft Windows. Microsoft Windows also has Swedish with Sami, Norwegian with Sami and Finnish with Sami layouts, which match the normal Swedish, Norwegian, or Finnish keyboards, but has additional Sami characters as AltGr-combinations.

Non-QWERTY-based Latin-script keyboard layouts

There are also keyboard layouts that do not resemble QWERTY very closely, if at all. These are designed to reduce finger movement and are claimed by some proponents to offer higher typing speed along with ergonomic benefits.

Dvorak

The Dvorak layout was named after its inventor, August Dvorak. There are also numerous adaptations for languages other than English, and single-handed variants. Dvorak's original layout had the numerals rearranged, but the present-day layout has them in numerical order. Dvorak has numerous properties designed to increase typing speed, decrease errors, and increase comfort. Research has found a 4% average advantage to the end user in typing speed. The layout concentrates the most used English letters in the home row where the fingers rest, thus having 70% of typing done in the home row.
The Dvorak layout is available out-of-the-box on most operating systems, making switching through software very easy. "Hardwired" Dvorak keyboards are also available, though only from specialized hardware companies.

Colemak

The Colemak layout is another popular alternative to the standard QWERTY layout, offering a more familiar change for users already accustomed to the standard layout.
It builds upon the QWERTY layout as a base, changing the positions of 17 keys while retaining the QWERTY positions of most non-alphabetic characters and many popular keyboard shortcuts, supposedly making it easier to learn than Dvorak for people who already type in QWERTY without sacrificing efficiency. It shares several design goals with the Dvorak layout, such as minimizing finger path distance and making heavy use of the home row. An additional defining feature of the Colemak layout is the lack of a caps lock key; an additional backspace key occupies the position typically occupied by Caps Lock on modern keyboards.
Operating systems such macOS, Linux, Android, Chrome OS, and BSD allow a user to switch to the Colemak layout. A program to install the layout is available for Microsoft Windows, as well as a portable AutoHotKey implementation.
Colemak variants exist, like Colemak Mod-DH.

Workman

Workman is an English layout supported out-of-the-box in Linux/X11 systems.
The Workman layout employs a hypothesis about the preferential movement of each finger rather than categorically considering the lowest letter row to be least accessible. Specifically, the index finger prefers to curl inwards rather than stretch outwards. So for the index finger, the position of second preference goes to the bottom row rather than the top row. Contrarily, the middle and ring fingers are relatively long and prefer to stretch out rather than curl in. Based on this, weighting is allotted to each key specifically rather than each row generically.
Another principle applied is that it is more natural and less effort to curl in or stretch out fingers rather than rotate one's wrist inwards or outwards. Thus the Workman layout allots a lower priority to the two innermost columns between the home keys, similarly to the Colemak-DH or "Curl" mods. Workman also balances the load quite evenly between both hands.
The Workman layout is found to achieve overall less travel distance of the fingers for the English language than even Colemak. It does however generally incur higher same-finger n-gram frequencies; or in other words, one finger will need to hit two keys in succession more often than in other layouts.

Other English layouts

There are many other layouts for English, each developed with differing basic principles. The CarpalX study lists many of these alternatives and analyses their relative strengths based on certain parameters.
The Norman Layout, like Workman, deprioritizes the central columns but gives more load to the right hand with the assumption that the right hand is more capable than the left. It also gives importance to retaining letters in the same position or at least the same finger as QWERTY.
MTGAP's Layout for a Standard Keyboard / an Ergonomic Keyboard has the lowest finger travel for a standard keyboard, and travel distance for an ergonomic keyboard second only to Arensito keyboard layout.
Further variations were created using the keyboard layout optimizer.
Other layouts lay importance on minimal key deviation from QWERTY to give a reasonable increase in typing speed and ergonomics with minimal relearning of keys.
Qwpr is a layout which changes only 11 basic keys from their QWERTY positions, with only 2 of them changing fingers. Minimak has versions which changes four, six, eight, or twelve keys, all have only 3 keys change finger. These intend to offer much of the reduced finger movement of Dvorak without the steep learning curve and with an increased ability to remain proficient with a QWERTY keyboard. The Qwpr layout is also designed for programmers and multilingual users, as it uses Caps Lock as a "punctuation shift", offering quicker access to ASCII symbols and arrow keys, as well as to 15 dead keys for typing hundreds of different glyphs such as accented characters, mathematical symbols, or emoji.
In Canada, the CSA keyboard is designed to write several languages, especially French.

Sholes 2nd Layout

, inventor of the QWERTY layout, created his own alternative in 1898. The patent was granted in 1896.
Similar to Dvorak, he placed all the vowels on the home row, but in this case on the right hand. The layout is right-hand biased with both the vowels and many of the most common consonants on the right side of the layout.

JCUKEN (Latin)

The JCUKEN layout was used in the USSR for all computers except IBM-compatible ES PEVM due to its phonetic compatibility with [|Russian ЙЦУКЕН] layout. The layout has the advantage of having punctuation marks on Latin and Cyrillic layouts mapped on the same keys.

Neo

The Neo layout is an optimized German keyboard layout developed in 2004 by the Neo Users Group, supporting nearly all Latin-based alphabets, including the International Phonetic Alphabet, the Vietnamese language and some African languages.
The positions of the letters are not only optimized for German letter frequency, but also for typical groups of two or three letters. English is considered a major target as well. The design tries to enforce the alternating usage of both hands to increase typing speed. It is based on ideas from de-ergo and other ergonomic layouts. The high frequency keys are placed in the home row. The current layout Neo 2.0 has unique features not present in other layouts, making it suited for many target groups such as programmers, mathematicians, scientists or LaTeX authors. Neo is grouped in different layers, each designed for a special purpose.
Most special characters inherit the meaning of the lower layers—the character is one layer above the, or the Greek is above the character. Neo uses a total of six layers with the following general use:
  1. Lowercase characters
  2. Uppercase characters, typographical characters
  3. Special characters for programming, etc.
  4. WASD-like movement keys and number block
  5. Greek characters
  6. Mathematical symbols and Greek uppercase characters

    BÉPO

The BÉPO layout is an optimized French keyboard layout developed by the BÉPO community, supporting all Latin-based alphabets of the European Union, Greek and Esperanto. It is also designed to ease programming. It is based on ideas from the Dvorak and other ergonomic layouts. Typing with it is usually easier due to the high frequency keys being in the home row.
Typing tutors exist to ease the transition.
In 2019, a slightly modified version of the BÉPO layout is featured in a French standard developed by AFNOR, along with an improved version of the traditional AZERTY layout. However, the use of the BÉPO layout remains marginal.

Dvorak-fr

The is a Dvorak like layout specific to the French language, without concession to the use of programming languages, and published in 2002 by Francis Leboutte. Version 2 was released in June 2020. Its design meets the need to maximize comfort and prevent risks when typing in French.
Unlike Azerty, the characters needed for good French typography are easily accessible: for example, the quotation marks and the curved apostrophe are available directly. More than 150 additional characters are available via dead keys.

Turkish (F-keyboard)

The Turkish language uses the Turkish Latin alphabet, and a dedicated keyboard layout was designed in 1955 by İhsan Sıtkı Yener. During its design, letter frequencies in the Turkish language were investigated with the aid of Turkish Language Association. These statistics were then combined with studies on bone and muscle anatomy of the fingers to design the Turkish F-keyboard. The keyboard provides a balanced distribution of typing effort between the hands: 49% for the left hand and 51% for the right. With this scientific preparation, Turkey has broken 14 world records in typewriting championships between 1957 and 1995. In 2009, Recep Ertaş and in 2011, Hakan Kurt from Turkey came in first in the text production event of the 47th and 48th Intersteno congresses respectively. Despite the greater efficiency of the Turkish F-keyboard however, the modified QWERTY keyboard is the one that is used on most computers in Turkey. The reason for the popularity of QWERTY in Turkey is that they were overwhelmingly imported since the beginning of the 1990s.

ŪGJRMV

The ŪGJRMV layout is specifically designed for the Latvian language.

Malt

The Malt layout—named for its inventor, South African-born Lilian Malt—is best known for its use on molded, ergonomic Maltron keyboards. Nevertheless, it has been adapted as well for flat keyboards, with a compromise involved: a flat keyboard has a single, wide space-bar, rather than a space button as on Maltron keyboards, so the E key was moved to the bottom row.

Modified Blickensderfer

The Blickensderfer typewriter, designed by George Canfield Blickensderfer in 1892, was known for its novel keyboard layout, its interchangeable font, and its suitability for travel. The Blickensderfer keyboard had three banks, with special characters being entered using a separate Shift key; the home row was, uniquely, the bottom one. A computer or standard typewriter keyboard, on the other hand, has four banks of keys, with home row being second from bottom.
To fit on a Sholes-patterned keyboard, the Blickensderfer layout was modified by Nick Matavka in 2012, and released for both Mac OS X and Windows. To accommodate the differences between Blickensderfer and Sholes keyboards, the order of the rows was changed and special characters were given their own keys.
The keyboard drivers created by Nick Matavka for the modified Blickensderfer layout have several variations, including one that includes the option of switching between Blick and another keyboard layout and one that is internationalised, allowing the entry of diacritics.

Alphabetical Layout

A few companies offer "ABC" layout keyboards.

Chorded keyboards and mobile devices

s, such as the Stenotype and Velotype, allow letters and words to be entered using combinations of keys in a single stroke. Users of stenotype machines regularly reach rates of 225 words per minute. These systems are commonly used for real-time transcription by court reporters and in live closed captioning systems. Ordinary keyboards may be adapted for this purpose using Plover. However, due to hardware constraints, chording three or more keys may not work as expected. Many high-end keyboards support n-key rollover and so do not have this limitation.
The multi-touch screens of mobile devices allow implementation of virtual on-screen chorded keyboards. Buttons are fewer, so they can be made larger. Symbols on the keys can be changed dynamically depending on what other keys are pressed, thus eliminating the need to memorize combos for characters and functions before use. For example, in the chorded GKOS keyboard which has been adapted for the Google Android, Apple iPhone, MS Windows Phone, and Intel MeeGo/Harmattan platforms, thumbs are used for chording by pressing one or two keys at the same time. The layout divides the keys into two separate pads which are positioned near the sides of the screen, while text appears in the middle. The most frequent letters have dedicated keys and do not require chording.
Some other layouts have also been designed specifically for use with mobile devices. The FITALY layout is optimised for use with a stylus by placing the most commonly used letters closest to the centre and thus minimising the distance travelled when entering words. A similar concept was followed to research and develop the MessagEase keyboard layout for fast text entry with stylus or finger. The ATOMIK layout, designed for stylus use, was developed by IBM using the Metropolis Algorithm to mathematically minimize the movement necessary to spell words in English. The ATOMIK keyboard layout is an alternative to QWERTY in ShapeWriter's WritingPad software. ASETNIOP is a keyboard layout designed for tablet computers that uses 10 input points, eight of them on the home row.

Other original layouts and layout design software

Several other alternative keyboard layouts have been designed either for use with specialist commercial keyboards or by hobbyists ; however, none of them are in widespread use, and many of them are merely proofs of concept. Principles commonly used in their design include maximising use of the home row, minimising finger movement, maximising hand alternation or inward rolls, minimising changes from QWERTY to ease the learning curve, and so on.
Maltron also has a single-handed keyboard layout.
Programs such as the Microsoft Keyboard Layout Creator, SIL Ukelele,
KbdEdit and Keyman Developer make it easy to create custom keyboard layouts for regular keyboards; users may satisfy their own typing patterns or specific needs by creating new ones from scratch or modify existing ones. Such editors can also construct complex key sequences using dead keys or key.
Certain virtual keyboards and keyboard layouts are accessible online. With no hardware limitations, those online keyboards can display custom layouts, or allow the user to pre-configure or try out different language layouts. Resulting text can then be pasted into other web sites or applications flexibly with no need to reprogram keyboard mappings at all.
Some high end keyboards allow users flexibility to reprogram keyboard mappings at the hardware level. For example, the Kinesis Advantage contoured keyboard allows for reprogramming single keys, as well as creating macros for remapping combinations of keys.
Non-QWERTY layouts were also used with specialized machines such as the 90-key Linotype type setting machine.

Keyboard layouts for non-Latin alphabetic scripts

Some keyboard layouts for non-Latin alphabetic scripts, most notably the Greek layout, are based on the QWERTY layout, in that glyphs are assigned as far as possible to keys that bear similar-sounding or appearing glyphs in QWERTY. This saves learning time for those familiar with QWERTY, and eases entry of Latin characters as well for Greek users.
This is not a general rule, and many non-Latin keyboard layouts have been invented from scratch.
All non-Latin computer keyboard layouts can also input Latin letters as well as the script of the language, for example, when typing in URLs or names. This may be done through a special key on the keyboard devoted to this task, or through some special combination of keys, or through software programs that do not interact with the keyboard much.

Brahmic scripts

There are many different systems developed to type Bengali language characters using a typewriter or a computer keyboard and mobile device. There were efforts taken to standardize the input system for Bengali in Bangladesh, but still no input method has still been effectively adopted widely.

Dhivehi

Dhivehi Keyboards have two layouts. Both are supported by Microsoft Windows.

InScript

is the standard keyboard for 12 Indian scripts including Devanagari, Bengali, Gujarati, Gurmukhi, Kannada, Malayalam, Oriya, Tamil, and Telugu etc.
Most Indian scripts are derived from Brahmi, therefore their alphabetic order is identical. On the basis of this property, the InScript keyboard layout scheme was prepared. So a person who knows InScript typing in one language can type in other scripts using dictation even without knowledge of that script.
An InScript keyboard is inbuilt in most modern operating systems including Windows, Linux, and Mac OS. It is also available in some mobile phones.

Khmer

uses its own layout designed to correspond, to the extent practicable, to its QWERTY counterpart, thus easing the learning curve in either direction. For example, the letter ល is typed on the same key as the letter L on the English-based qwerty.
Since Khmer has no capitalization, but many more letters than Latin, the shift key is used to select between two distinct letters. For most consonants, the shift key selects between a "first series" consonant and the corresponding "second series" consonant, e.g., ត and ទ on the T key, or ប and ព on the B key. For most vowels, the two on the key are consecutive in the Khmer alphabet.
Although Khmer has no capital or lowercase, per se, there are two forms for consonants. All but one have a second, "subscript", form to be used when it occurs as the second letter in a consonant cluster. The glyph below the letter ញ on the J key cap produces a non-printing character, U+17D2, which functions to indicate that the following Khmer letter is to be rendered subscripted.
Khmer is written with no spaces between words, but lines may only be broken at word boundaries. The spacebar therefore produces a zero width space for invisible word separation. SHIFT+SPACE produces visible spaces which are used as punctuation, e.g., to separate items in lists, etc.
There are five vowel signs that appear on the key caps, and are considered single letters in the Khmer alphabet, but are not assigned to unicode code points. They are instead represented by two consecutive vowel sign codes, the glyphs of which combine to make the vowel's glyph, e.g., េះ is stored as េ U+17C1 followed by ះ U+17C7. The Khmer keyboard map does not send the code pair sequence, however. It sends one officially-unassigned code. It is up to the running application to recognize these codes and insert the appropriate code pair into the document.

Thai

The less frequently used characters are accessed by the Shift key. Despite their wide usage in Thai, Arabic numbers are not present on the main section of the keyboard. Instead they are accessed via the numeric keypad or by switching to the Latin character set. Beside the Kedmanee layout also the Pattachote layout is used, though it is much less common.

Lao

The keyboard layout used for Lao language.

Sinhala

The Sinhala keyboard layout is based on the Wijesekara typewriter for Sinhala script.

Tibetan

Tibetan (China)
The Chinese National Standard on Tibetan Keyboard Layout standardises a layout for the Tibetan language in China.
The first version of Microsoft Windows to support the Tibetan keyboard layout is MS Windows Vista. The layout has been available in Linux since September 2007.
Tibetan (International)
Mac OS-X introduced Tibetan Unicode support with OS-X version 10.5 and later, now with three different keyboard layouts available: Tibetan-Wylie, Tibetan QWERTY and Tibetan-Otani.
Dzongkha (Bhutan)
The Bhutanese Standard for a Dzongkha keyboard layout standardizes the layout for typing Dzongkha, and other languages using the Tibetan script, in Bhutan. This standard layout was formulated by the Dzongkha Development Commission and Department of Information Technology in Bhutan. The Dzongkha keyboard layout is very easy to learn as the key sequence essentially follows the order of letters in the Dzongkha and Tibetan alphabet. The layout has been available in Linux since 2004.

Arabic

This layout was developed by Microsoft from the classic Arabic typewriter layout and is used by IBM PCs. There is also a 102-key variant and a 102-key phonetic variant that maps to AZERTY.
For Apple keyboards there is a different layout.
For chrome a 1:1 layout also exists.

Armenian

The Armenian keyboard is similar to the Greek in that in most cases, a given Armenian letter is at the same location as the corresponding Latin letter on the QWERTY keyboard. The illustrated keyboard layout can be enabled on Linux with:. Western and Eastern Armenian have different layouts.
In the pre-computer times Armenian keyboards had quite a different layout, more suitable for producing letter combinations inherent to the language.
Several attempts have been made to create innovative ergonomical layouts, some of them inspired by Dvorak.

Cyrillic

Bulgarian

The current official Bulgarian keyboard layout for both typewriters and computer keyboards is described in BDS 5237:1978. It superseded the old standard, BDS 5237:1968, on 1 January 1978. Like the Dvorak layout, it has been designed to optimize typing speed and efficiency, placing the most common letters in the Bulgarian language — О, Н, Т, and А — under the strongest fingers. In addition to the standard 30 letters of the Bulgarian alphabet, the layout includes the non-Bulgarian Cyrillic symbols Э and ы and the Roman numerals I and V.
There is also a second, informal layout in widespread use — the so-called "phonetic" layout, in which Cyrillic letters are mapped to the QWERTY keys for Latin letters that "sound" or "look" the same, with several exceptions. This layout is available as an alternative to the BDS one in some operating systems, including Microsoft Windows, Apple Mac OS X and Ubuntu Linux. Normally, the layouts are set up so that the user can switch between Latin and Cyrillic script by pressing Shift + Alt, and between BDS and Phonetic by pressing Shift + Ctrl.
In 2006, Prof. Dimiter Skordev from the Faculty of Mathematics and Informatics of Sofia University and Dimitar Dobrev from the Bulgarian Academy of Sciences proposed a new standard, prBDS 5237:2006, including a revised version of the old BDS layout, which includes the letter Ѝ and the capital Ы and replaces the letters I and V with the currency symbols of $ and € respectively, and a standardization of the informal "phonetic" layout. After some controversy and a public discussion in 2008, the proposal was not accepted, although it had been already used in several places – the "Bulgarian Phonetic" layout in MS Windows Vista is based on it. There is a new "Bulgarian Phonetic" layout in MS Windows 7.

Russian

JCUKEN
The most common keyboard layout in modern Russia is the so-called Windows layout, which is the default Russian layout used in the MS Windows operating system. The layout was designed to be compatible with the hardware standard in many other countries, but introduced compromises to accommodate the larger alphabet. The full stop and comma symbols share a key, requiring the shift key to be held to produce a comma, despite the high relative frequency of comma in the language.
There are some other Russian keyboard layouts in use: in particular, the traditional Russian Typewriter layout and the Russian DOS layout. The Russian Typewriter layout can be found on many Russian typewriters produced before the 1990s, and it is the default Russian keyboard layout in the OpenSolaris operating system.
Keyboards in Russia always have Cyrillic letters on the keytops as well as Latin letters. Usually Cyrillic and Latin letters are labeled with different colors.
Russian QWERTY/QWERTZ-based phonetic layouts
The Russian phonetic keyboard layout is widely used outside Russia, where normally there are no Russian letters drawn on keyboard buttons. This layout is made for typists who are more familiar with other layouts, like the common English QWERTY keyboard, and follows the Greek and Armenian layouts in placing most letters at the corresponding Latin letter locations. It is famous among both native speakers and people who use, teach, or are learning Russian, and is recommended — along with the Standard Layout — by the linguists, translators, teachers and students of AATSEEL.org. The earliest known implementation of the Cyrillic-to-QWERTY homophonic keyboard was by former AATSEEL officer Constance Curtin between 1972 and 1976, for the PLATO education system's Russian Language curriculum developed at the University of Illinois at Urbana-Champaign. Curtin's design sought to map phonetically related Russian sounds to QWERTY keys, to map proximate phonetic and visual cues nearby one another, as well as to map unused positions in a mnemonically ideal way. Peter Zelchenko worked under Curtin at UIUC, and his later modifications to the number row for Windows and Macintosh keyboards follow Curtin's original design intent.
There are several different Russian phonetic layouts, for example YaZhERT, YaWERT, and YaShERT suggested by AATSEEL.org and called "Student" layout. They are named after the first several letters that take over the 'QWERTY' row on the Latin keyboard. They differ by where a few of the letters are placed. For example, some have Cyrillic 'B' on the Latin 'W' key, while others have it on the Latin 'V' key.
The images of AATSEEL "Student", YaZhERT and YaWERT are shown on .
There are also variations within these variations; for example the Mac OS X Phonetic Russian layout is YaShERT but differs in placement of ж and э.
Windows 10 includes its own implementation of a mnemonic QWERTY-based input method for Russian, which does not fully rely on assigning a key to every Russian letter, but uses the sh, sc, ch, ya, yu, ye, yo combinations to input ш, щ, ч, я, ю, э, and ё respectively.
Virtual Russian keyboards allow entering Cyrillic directly in a browser without activating the system layout. This virtual keyboard offers YaZhERT variant. Another virtual keyboard supports both traditional and some phonetic keyboard layouts, including AATSEEL "Student", Mac OS X Phonetic Russian layout and the RUSSIANEASY 1:1 keyboard for chrome.

Serbian (Cyrillic)

Apart from a set of characters common to most Cyrillic alphabets, the Serbian Cyrillic layout uses six additional special characters unique or nearly unique to the Serbian Cyrillic alphabet: Љ, Њ, Ћ, Ђ, Џ, and Ј.
Due to the bialphabetic nature of the language, actual physical keyboards with the Serbian Cyrillic layout printed on the keys are uncommon today. Typical keyboards sold in Serbian-speaking markets are marked with Serbian Latin characters and used with both the Latin and Cyrillic layout configured in the software. What makes the two layouts this readily interchangeable is that the non-alphabetic keys are identical between them, and alphabetic keys always correspond directly to their counterparts. This also makes the Serbian Cyrillic layout a rare example of a non-Latin layout based on QWERTZ.
The Macedonian dze is on this keyboard despite not being used in Serbian Cyrillic. The gje and kje can be typed by striking the apostrophe key then striking the G or K key.
There is also a dedicated Macedonian keyboard that is based on QWERTY and uses Alt Gr to type the dje and tshe. However, the capital forms are next to the small forms. An alternative version of the layout is quite different and has no dje or tshe access. This alternative was not supported until Windows Vista.

Ukrainian

keyboards, based on a slight modification of Russian Standard Layout, often also have the Russian Standard layout marked on them, making it easy to switch from one language to another. This keyboard layout had several problems, one of which was the omission of the letter Ґ, which does not exist in Russian. The other long-standing problem was the omission of the apostrophe, which is used in Ukrainian almost as commonly as in English, but which also does not exist in Russian. Both of these problems were resolved with the "improved Ukrainian" keyboard layout for Windows available with Vista and subsequent Windows versions.
There also exists an adapted keyboard for Westerners learning Ukrainian which closely matches the qwerty keyboard, so that the letters either have the same sound or same shape, for example pressing the "v" on the Latin QWERTY produces the Cyrillic в and pressing the qwerty "w" key gives the Cyrillic ш.

Georgian

All keyboards in Georgia are fitted with both Latin and Georgian letters. As with the Armenian, Greek, and phonetic Russian layouts, most Georgian letters are on the same keys as their Latin equivalents. During the Soviet era, the Georgian alphabet was adapted to the Russian JCUKEN layout, mainly for typewriters. Soviet computers didn't support Georgian keyboards. After the dissolution of the Soviet Union a large variety of computers were introduced to post-Soviet countries. The keyboards had QWERTY layout for Latin alphabet and JCUKEN for Cyrillic both printed on keys. Georgia started to adopt the QWERTY pattern. In both cases the letters which didn't exist in the Cyrillic or Latin alphabets were substituted by letters that didn't exist in Georgian alphabet. Today the most commonly used layout follows the QWERTY pattern with some changes.

Greek

The usual Greek layout follows the US layout for letters related to Latin letters, substitutes phonetically similar letters.
Greek has two fewer letters than English, but has two accents which, because of their frequency, are placed on the home row at the U.K. ";" position; they are dead keys. Word-final sigma has its own position as well, replacing W, and semicolon and colon move to the position of Q.
The Greek Polytonic layout has various dead keys to input the accented letters. There is also the Greek 220 layout and the Greek 319 layout.

Hebrew

All keyboards in Israel are fitted with both Latin and Hebrew letters. Trilingual editions including either Arabic or Cyrillic also exist.
Note that in the standard layout, paired delimiters – parentheses, brackets , and braces, as well as less/greater than <>, – are in the opposite order from the standard in other left-to-right languages. This results in "open"/"close" being consistent with right-to-left languages. This is shared with Arabic keyboards.
Certain Hebrew layouts are extended with niqqud symbols, which require Alt+Shift or similar key combination in order to be typed.

Inuktitut

has two similar, though not identical, commonly available keyboard layouts for Windows. Both contain a basic Latin layout in its base and shift states, with a few Latin characters in the AltGr shift states. The Canadian Aboriginal syllabics can be found in the Capslock and AltGr shift states in both layouts as well.
The difference between the two layouts lies in the use of as an alternate to AltGr to create the dotted, long vowel syllables, and the mapping of the small plain consonants to the Caps + number keys in the "Naqittaut" layout, while the "Latin" layout does not have access to the plain consonants, and can only access the long vowel syllables through the AltGr shift states.

Cherokee

The Cherokee language uses an 86-character Syllabary. The keyboard is available for the iPhone and iPad and is supported by Google.

Tifinagh

Tamazight (Berber)

The TamazightTamazight standards-compliant layout is optimised for a wide range of Tamazight language variants, and includes support for Tuareg variants. AZERTY-mapped, it installs as "Tamazight F" and can be used both on the French locale and with Tamazight locales. QWERTY and QWERTZ adaptations are available for the physical keyboards used by major Amazigh communities around the world.
Non-standards-compliant but convenient combined AZERTY Latin script layouts exist which also allow typing in Tifinagh script without switching layout:
A non-standards-compliant but convenient combined AZERTY-mapped Tifinagh layout exists which also allows typing in Latin script without switching layout:
All the above layouts were designed by the and are available from there.
Morocco
The Royal institute of the Amazigh culture developed a national standard Tifinagh layout for Tamazight in Morocco. It is included in Linux and Windows 8, and is available for the Mac and older versions of Windows.
A compatible, international version of this layout, called "Tifinagh " exists for typing a wide range of Tamazight language variants, and includes support for Tuareg variants. It was designed by the and is available from there.

[|East Asian languages]

, Japanese, and Korean require special input methods, often abbreviated to CJK IMEs, due to the thousands of possible characters in these languages. Various methods have been invented to fit every possibility into a QWERTY keyboard, so East Asian keyboards are essentially the same as those in other countries. However, their input methods are considerably more complex, without one-to-one mappings between keys and characters.
In general, the range of possibilities is first narrowed down. Then, if there remains more than one possibility, the desired ideogram is selected, either by typing the number before the character, or using a graphical menu to select it. The computer assists the typist by using heuristics to guess which character is most likely desired. Although this may seem painstaking, East Asian input methods are today sufficient in that, even for beginners, typing in these languages is only slightly slower than typing English.
In Japanese, the QWERTY-based JIS keyboard layout is used, and the pronunciation of each character is entered using various approximations to Hepburn romanization or Kunrei-shiki romanization. There are several kana-based typing methods. See also Japanese language and computers.
Chinese has the most complex and varied input methods. Characters can either be entered by pronunciation, or by structure. Most of the structural methods are very difficult to learn but extremely efficient for experienced typists, as there is no need to select characters from a menu. For detailed description, see Chinese input methods for computers.
There exist a variety of other, slower methods in which a character may be entered. If the pronunciation of a character is not known, the selection can be narrowed down by giving its component shapes, radicals, and stroke count. Also, many input systems include a "drawing pad" permitting "handwriting" of a character using a mouse. Finally, if the computer does not have CJK software installed, it may be possible to enter a character directly through its encoding number.
In contrast to Chinese and Japanese, Korean is typed similarly to Western languages. There exist two major forms of keyboard layouts: Dubeolsik, and Sebeolsik. Dubeolsik, which shares its symbol layout with the QWERTY keyboard, is much more commonly used. While Korean consonants and vowels are grouped together into syllabic grids when written, the script is essentially alphabetical, and therefore typing in Korean is quite simple for those who understand the Korean alphabet Hangul. Each jamo is assigned to a single key. As the user types letters, the computer automatically groups them into syllabic characters. Given a sequence of jamo, there is only one unambiguous way letters can be validly grouped into syllables, so the computer groups them together as the user types.

Hangul (for Korean)

Pressing the Han/Eng key once switches between Hangul as shown, and QWERTY. There is another key to the left of the space bar for Hanja input. If using an ordinary keyboard without the two extra keys, the right Alt key will become the Ha/En key, and the right Ctrl key will become the Hanja key. Apple Keyboards do not have the two extra keys.

Dubeolsik

Dubeolsik is by far the most common and the sole national standard of Hangul keyboard layout in use in South Korea since 1969. Consonants occupy the left side of the layout, while vowels are on the right.

Sebeolsik 390

Sebeolsik 390 was released in 1990. It is based on Dr. Kong Byung Woo's earlier work. This layout is notable for its compatibility with the QWERTY layout; almost all QWERTY symbols that are not alphanumeric are available in Hangul mode. Numbers are placed in three rows. Syllable-initial consonants are on the right, and syllable-final consonants and consonant clusters are on the left. Some consonant clusters are not printed on the keyboard; the user has to press multiple consonant keys to input some consonant clusters, unlike Sebeolsik Final. It is more ergonomic than the dubeolsik, but is not in wide use.

Sebeolsik Final

Sebeolsik Final is another Hangul keyboard layout in use in South Korea. It is the final Sebulsik layout designed by Dr. Kong Pyŏng'u, hence the name. Numbers are placed on two rows. Syllable-initial consonants are on the right, and syllable-final consonants and consonant clusters are on the left. Vowels are in the middle. All consonant clusters are available on the keyboard, unlike the Sebeolsik 390 which does not include all of them. It is more ergonomic than the dubeolsik, but is not in wide use.

Sebeolsik Noshift

Sebeolsik Noshift is a variant of sebeolsik which can be used without pressing the shift key. Its advantage is that people with disabilities who cannot press two keys at the same time will still be able to use it to type in Hangul.

Chinese

keyboards are usually in US layout with/without Chinese input method labels printed on keys. Without an input method handler activated, these keyboards would simply respond to Latin characters as physically labelled, provided that the US keyboard layout is selected correctly in the operating system. Most modern input methods allow input of both simplified and traditional characters, and will simply default to one or the other based on the locale setting.

People's Republic of China

Keyboards used in the People's Republic of China are standard or slightly modified English US ones without extra labelling, while various IMEs are employed to input Chinese characters. The most common IMEs are Hanyu pinyin-based, representing the pronunciation of characters using Latin letters. However, keyboards with labels for alternative structural input methods such as Wubi method can also be found, although those are usually very old products and are extremely rare, as of 2015.

Taiwan

Computers in Taiwan often use Zhuyin style keyboards, many also with Cangjie method key labels, as Cangjie is a popular method for typing in Traditional Chinese. The bopomofo style keyboards are in lexicographical order, top-to-bottom left-to-right.
The codes of three input methods are typically printed on the Chinese keyboard: Zhuyin ; Cangjie ; and Dayi.

Hong Kong

In Hong Kong, both Chinese and US keyboards are found. Japanese keyboards are occasionally found, and UK keyboards are rare.
For Chinese input, Shape-based input methods such as Cangjie or Chinese handwriting recognition are the most common input method. The use of phonetic-based input method is uncommon due to the lack of official standard for Cantonese romanisation and people in Hong Kong almost never learn any romanisation schemes in schools. An advantage of phonetic-based input method is that most Cantonese speakers are able to input Traditional Chinese characters with no particular training at all where they spell out the Cantonese sound of each character without tone marks, e.g. 'heung gong' for 香港 and to choose the characters from a list. However, Microsoft Windows, which is the most popular operating system used in desktops, does not provide any Cantonese phonetic input method, requiring users to find and install third-party input method software. Also, most people find the process of picking characters from a list being too slow due to homonyms so the Cangjie method is generally preferred.
Although thorough training and practice are required to use Cangjie, many Cantonese speakers have taken Cangjie input courses because of the fast typing speed availed by the input method. This method is the fastest because it has the capability to fetch the exact, unambiguous Chinese character which the user has in mind to input, pinpointing to only one character in most cases. This is also the reason why no provision for an input of phonetic accent is needed to complement this Input Method. The Cangjie character feature is available on both Mac OS X and Windows. On Mac OS X, handwriting recognition input method is bundled with the OS.

Japanese

The JIS standard layout includes Japanese kana in addition to a QWERTY style layout. The shifted values of many keys are a legacy of bit-paired keyboards, dating to ASCII telex machines and terminals of the 1960s and 1970s.
For entering Japanese, the most common method is entering text phonetically, as romanized kana, which are then converted to kanji as appropriate by an input method editor. It is also possible to type kana directly, depending on the mode used. To type, "Takahashi", a Japanese name, one could type either in Romanized input mode, or in kana input mode. Then the user can proceed to the conversion step to convert the input into the appropriate kanji.
The extra keys in the bottom row, and the special keys in the leftmost column, control various aspects of the conversion process and select different modes of input.
The Oyayubi Shifuto layout is based on kana input, but uses two modifying keys replacing the space bar. When a key is pressed simultaneously with one of the keys, it yields another letter. Letters with the "dakuten" diacritic are typed with the opposite side "thumb shift". Letters with "handakuten" are either typed while the conventional pinky-operated shift key is pressed, or, on the "NICOLA" variation, on a key which does not have a dakuten counterpart.
The key in the QWERTY layout individually yields は, but with the key, yields み. Simultaneous input with yields ば, which is the individually mapped letter with the aforementioned dakuten. While the pinky-operated key is pressed, the same key yields ぱ.
For more details, see the section on East Asian languages above, and the articles Japanese language and computers, Japanese input methods, and language input keys.